Instruction Manual

3
• Provide adequate space
above and on all sides for
air circulation around the
sandwich press.
• Do not place the sandwich
press on any surface that
may be affected by heat. The
use of a heat resistant matt
is recommended on these
surfaces.
• Do not use on a sink
drain board.
• Always use the sandwich
press on a dry, level surface.
• Do not touch hot surfaces.
Use the handles to lift and
open the top plate. Take care
when using the Adjustable
Grilling Height Control.
• Do not leave the sandwich
press unattended when
in use.
• The outer housing of the
sandwich press may be hot
during and after use. Please
do not touch hot surfaces.
Always keep the power cord
of this products, and those
of other appliances nearby,
clear from the housing.
• The sandwich press is not
suitable to be used in a small
appliance enclosure. Ensure
to leave adequate space all
around the sandwich press.
Minimum space of 10cm is
recommended.
• Do not place anything on top
of the sandwich press when
the lid is closed, when in use
and when stored.
• Always switch the sandwich
press off at the power outlet,
then unplug the power
cord and to allow to cool, if
appliance is not in use, before
cleaning, before attempting
to move the appliance,
disassembling, assembling
and when storing the
appliance.
• Do not use harsh abrasives,
caustic cleaners or oven
cleaners when cleaning the
sandwich press.
• Keep the exterior housing and
the non-stick cooking plates
clean. Follow the cleaning
instructions provided in this
book. Refer to Care, Cleaning
and Storage (Page 9).
• This appliance is not intended
to be operated by means of
an external timer or separate
remote control system.