Instruction Manual

15
The underside of the cooking plate may discol-
our over time and can form a layer of corrosion.
This is normal. Any discolouration that may
occur to either side of the cooking plate will
only detract from the appearance of the plate
and will not affect the cooking performance.
To remove discolouration or corrosion, use
a non-abrasive plastic scouring pad or nylon
washing brush. Rinse and dry thoroughly.
Ensure the round pad on the underside of the
plate is clean.
STORAGE
1. Ensure the grill is turned OFF by turning
the PLATE TEMP dial to the OFF position.
The grill is OFF when the LCD screen
displays OFF. Remove the power plug from
the wall outlet.
2. Allow the grill, cooking plates and drip tray
to cool completely.
3. Ensure the grill, cooking plates and drip
tray are clean and dry.
4. Ensure the drip tray is correctly
re-inserted into the grill.
5. Ensure the cooking plates are correctly
re-inserted and securely locked
into position.
6. Ensure the cooking plates are locked
together by sliding the adjustable
height control away from you, into
the LOCK position.
7. Wrap the probe cord around the PROBE
STORAGE on the right side of the grill,
then locate the probe into the recess on
the face of the PROBE STORAGE.
8. Store on a flat, dry, level surface.
Alternatively, the grill may be stored in an
upright position.