Datasheet

50 800.521.9614 BRETFORD.COM
MOTIVE TABLE BASE
Legs are constructed with 14-gauge flat oval tubing
and feature arc welded connections to the mounting
plate. The legs mount to the underside of the work
surface with a metal-to-metal screw connection
through a 3/16” thick steel plate. Each leg is angled
10º from attachment point toward the outer edge of
the tabletop. Plastic glides attached to legs prevent
floor damage.
WORK SURFACE
Work surfaces feature a 1” thick 45 lb. density high-
pressure laminate top. HPL tops feature a .03” work
surface and a .03” backer. All models come with
a 22.5º knife profile edge with a Clear Coat finish
on exposed MDF and can be used on laminates or
veneers.
WORK SURFACE EDGE DETAIL 08
Tables with laminate tops will feature edge detail
08, a 22.5º knife profile with a Clear Coat finish on
exposed MDF.
WORK SURFACE EDGE DETAIL 09
Tables with veneer tops will feature edge detail 09, a
22.5º knife profile with a clear coat finish on exposed
MDF.
The occasional table makes informal learning functional. The perfect compliment to the EDU 2.0 MOTIV
™
line of freestanding and modular soft seating, these tables come
in round, square and rectangle shapes and a variety of laminate and veneer surfaces.
 •Accommodating: Tables come in a variety of shapes.
 •Options: Tables come in a variety of sizes, laminates and veneer choices.
 •Guaranteed: EDU 2.0 Occasional Tables are backed by a 12-year warranty.
 •GREENGUARD
®
Children and Schools certification pending, excluding veneer options.
 •CarbonNeutral
®
Certified Product.
FINISH OPTIONS
Tables can be ordered in any standard veneer,
laminate, and powder paint offered by Bretford
®
.
CONSTRUCTION AND ENVIRONMENTAL TESTING
MOTIV
™
Occasional Tables tables have been tested
to meet or exceed ANSI/BIFMA 5.5-2008 standards
for tables and desks. GREENGUARD
®
indoor air
quality certification is pending, excluding veneer
options. CarbonNeutral
®
certified product.
RECYCLED CONTENT
Tables are constructed with a steel base that
is comprised of a minimal 25% to 35% post-
consumer recycled material. All steel components
are completely recyclable at the end of the product
life cycle. Work surfaces with HPL have an MDF
substrate constructed with an average of 70%
recycled content.
SPECIFICATION INFORMATION
MOTIV
™
OCCASIONAL TABLE
TABLES