Datasheet

46 800.521.9614 BRETFORD.COM
PEDESTAL TABLE BASE
BASE
Circle- and Square-shaped Café Tables feature
a 1/4" flat round steel base that stands on five 1"
non-marring, hard-plastic glides with 1/4" leveling
adjustment. Oval-shaped Café Tables feature two
1/4" flat round steel bases that each stand on five 1"
non-marring, hard-plastic glides with 1/4" leveling
adjustment.
LEG
16-gauge 5”D round steel tube leg attaches to
Flat Round steel base. Two laser cutout hooks are
placed at 23 7/8” high on sitting height tables and
34 3/8” high on standing height tables. The hooks
on each side of the leg designed to hang backpacks,
handbags, and coats. Leg is attached to work
surface with 2 threaded steel rods for stability.
CAFÉ TABLE WORK SURFACE
All laminate work surfaces feature a 1” thick 45 lb
density high-pressure laminate (HPL) top. All veneer
work surfaces feature a 1 1/8" thick 45 lb density
veneer top. HPL and veneer tops feature a .03”
work surface and a .03” backer. Circular and Square
Café Tables will have 2, Power Domes or Duracell
®
Powermat
™
units. Powered Circle- and Square-
shaped Café Tables feature one Power Dome or one
Duracell
®
Powermat
™
. Powered Oval-shaped Café
Tables feature two Power Domes or two Duracell
®
Powermat
™
units. RDOME40 features (4) 120 V
power outlets, and RDOME 22 features 2 120 V
power outlets and 2 RJ45 data ports. Each Duracell
®
Powermat
™
mat provides charging to Duracell
®
Powermat
™
enabled mobile devices. Power Dome(s)
and Duracell
®
Powermat
™
units will be installed on
the worksurface positioned directly over the center
of each base. Power Domes ordered separately. All
models come with a 22.5º knife profile edge with a
clear coat finish on exposed MDF and can be used
on laminates or veneers.
Simple, clean and collaborative. The EDU 2.0 Café Tables support both formal and informal collaboration. Available in circle, oval and square shapes, café tables come in
standing and sitting heights and can accommodate the Duracell
®
Powermat
™
or Power Dome electrical powering and charging options.
 •Accommodating: Tables come in a variety of shapes and heights.
 •PowerReady: Bretford
®
optional Power Dome and Duracell
®
Powermat
™
powering systems enable power and charging of today’s technologies.
 •Options:Tables come in a variety of sizes, laminate or veneer finishes and edge choices.
 •Guaranteed: EDU 2.0 Café Tables are backed by a 12-year warranty. Optional electrical components are backed by a 1-year warranty.
 •GREENGUARD
®
Children and Schools certification pending, excluding veneer options.
 •CarbonNeutral
®
Certified Product.
POWER AND CORD MANAGEMENT
RDOME40 unit and RDOME22 unit are UL listed for
safety. They attach through the center cut out and
provide access to power and data above the work
surface. RDOME40 provides 4 electrical outlets
and a 6’ power cord, and RDOME22 provides 2
electrical outlets with a 6’ power cord and 2 RJ-45
data jacks. Attaching wires are fed through the inside
of 16-gauge 5” D round steel tube leg and under the
¼” Flat Round steel base. Glides can be raised and
lowered ¼” to provide room for thick power cords.
Additional wiring required for the RJ-45 data jacks.
RDOME40 and RDOME22 require minimal assembly.
Units are sold separately. Each Duracell
®
Powermat
™
mat provides charging to Duracell
®
Powermat
™
enabled mobile devices.
WORK SURFACE EDGE DETAIL 01
Tables with edge detail 01 have a 3 mm
thermoplastic elastomer (TPE) t-mold edge band,
which runs the entire perimeter of the work surface.
TPE is non-toxic, additive and phthalate free, and
recyclable at the end of the product life cycle. In
landfill conditions TPE will break down, releasing
only water and biodegradable components. TPE is
a highly flexible material that consumes less energy
during manufacturing and preferable to polyvinyl
chloride (PVC). PVC is constructed with chlorine
and when burned omits toxic byproducts such
as dioxins, chlorocarbons and hydrochloric acid.
Additionally PVC is constructed using a significant
amount of lead, which is highly toxic during the
product life cycle and after disposal.
WORK SURFACE EDGE DETAIL 08
Tables with laminate tops will feature edge detail
08, a 22.5º knife profile with a clear coat finish on
exposed MDF.
WORK SURFACE EDGE DETAIL 09
Tables with veneer tops will feature edge detail 09, a
22.5º knife profile with a clear coat finish on exposed
MDF.
POWER COMPONENTS
Tables are available to power using the Power
Dome electrical modules or with the Duracell
®
Powermat
™
. Power Dome electrical modules are
not included with the table and ordered separately.
Duracell
®
Powermat
™
power modules are included
with the table.
FINISH OPTIONS
Tables can be ordered in any standard veneer,
laminate, trim and powder paint offered by Bretford
®
.
CONSTRUCTION AND ENVIRONMENTAL TESTING
Café tables have been tested to meet or exceed
ANSI/BIFMA 5.5-2008 standards for tables
and desks. GREENGUARD
®
indoor air quality
certification is pending, excluding veneer options.
CarbonNeutral
®
certified product.
RECYCLED CONTENT
Tables are constructed with a steel base that
is comprised of a minimal 25% to 35% post-
consumer recycled material. All steel components
are completely recyclable at the end of the product
life cycle. Work surfaces with HPL have an MDF
substrate constructed with an average of 70%
recycled content.
SPECIFICATION INFORMATION
EXPLORE
™
PEDESTAL BASE CAFÉ TABLE
TABLES