User guide

2
GENERAL USE
POWER SWITCH
Locatedontherighthandsideofthecabinet.
AC OUTLET ACCESS - ADAPTER STORAGE
PlugadaptersintoACoutletsasneeded.Usevelcrostrapstotiedownbricktypepoweradapters.
DEVICE STORAGE
ThreadassociatedpowercablesthroughslotsinACaccessdoorandthenclose.
ACOutletAccess-AdapterStorage DeviceStorage
PowerSwitch
USER GUIDE | CORE™ 10S CABINET STORE & CHARGE | CHGCAB10-CK
UsingtheHandle
InsertingtheShackle LockProgramming
HANDLE & LOCK INSTRUCTIONS
USING THE HANDLE
The Flywheel Handle/Lock serves as a handle to open and close the cabinet when the shackle is not inserted.
INSERTING THE SHACKLE
Holdthelockshackleonaslightanglewheninsertingintotheshackleopeningandpushrmly.Oncetheshackleisinsertedthecam
isnolongerengagedandtheFlywheelHandle/Lockwillspinwithoutengagingthelockingcam,preventingthedoorfromopening.
LOCK PROGRAMMING
Toprogramtheuserprogrammablecombinationpadlockincluded:
1. Openthepadlockusingcombination“0000.”
2. Inserttheprogrammingkeyandturn90degrees.
3. Set the combination you would like to use.
4. Removetheprogrammingkey.