User Manual
Hanger for
mounting strap
Battery Door
Batteries
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
AA
AA
AA
AA
AA
AA
AA
AA
Game Camera requires 8 AA batteries.
Insert as pictured.
1. To ensure the chip's initialization process complete,
please wait 4 seconds after install the batteries
before turn on the device.
2. The product requires class 6 or above TF card.
AAx8
Batteries
ON OFF
ON OFF
Micro SD
Card Slot
Mini USB Port
(for viewing and
transferring photos)
On & Off
Switch
Preview
Buttons
UP
29
Mounting Strap
USB Cable
Battery Tray
5 MP Lens
IR Lights
Motion Sensor
Nail or Screw Hanger
Preview Screen
Steps for set up , operation, and image viewing
1. Remove Battery Tray
2. Insert Batteries 8 (AA)
3. Insert Battery Tray. NOTE Detail pictures below. You must
insert tray with the curves at the edged of the tray orientated
the correct way. Failure to orientate the tray correctly will
break plastic tabs in the corners of the camera housing which
will reduce the integrity of the camera body.
4. Insert Micro SD Card (up to 32GB) into the Micro SD card slot.
***There is no programming required to set up the camera.***
5.
Turn Camera “On” by sliding the selector switch to the “On” position.
6. The camera screen should show what it in front of the lens as
an image. You can test by looking directly at the lens. You should
see yourself on the “Preview Screen”.
7. After a few seconds you will see a countdown appear that will
countdown from 30 until 0. After the countdown is complete the
camera is on and taking pictures based on movement in front of
the motion sensor.
8. To view pictures recorded by the camera on the micro sd card which is in the camera depress
one of arrows for a few seconds and the camera will switch into a “view mode”. You may
advance the pictures by depressing the arrow keys. When you are finished previewing pictures
the camera will resume normal operation after no buttons are depressed for a few seconds.
The camera can also be connected to a computer via USB cable. To connect to a computer via
USB cable, slide the on and off swicth to “off”. insert the Micro USB cable to the camera and then
to a computer. You will see a connection icon appear on the camera screen. You can now look
at pictures on your personal computer with your favorite JPEG viewer.
9. Mounting can be done with the nylon strap provided or
by screw or nail through the screw or nail hanger located on
top of the camera.
Questions or comments please call
866-252-3811
www.bresserusa.com
Hanger for
mounting strap
Battery Door
Batteries
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
AA
AA
AA
AA
AA
AA
AA
AA
Game Camera requires 8 AA batteries.
Insert as pictured.
1. To ensure the chip's initialization process complete,
please wait 4 seconds after install the batteries
before turn on the device.
2. The product requires class 6 or above TF card.
AAx8
Batteries
ON OFF
ON OFF
Micro SD
Card Slot
Mini USB Port
(for viewing and
transferring photos)
On & Off
Switch
Preview
Buttons
UP
29
Mounting Strap
USB Cable
Battery Tray
5 MP Lens
IR Lights
Motion Sensor
Nail or Screw Hanger
Preview Screen
Steps for set up , operation, and image viewing
1. Remove Battery Tray
2. Insert Batteries 8 (AA)
3. Insert Battery Tray. NOTE Detail pictures below. You must
insert tray with the curves at the edged of the tray orientated
the correct way. Failure to orientate the tray correctly will
break plastic tabs in the corners of the camera housing which
will reduce the integrity of the camera body.
4. Insert Micro SD Card (up to 32GB) into the Micro SD card slot.
***There is no programming required to set up the camera.***
5.
Turn Camera “On” by sliding the selector switch to the “On” position.
6. The camera screen should show what it in front of the lens as
an image. You can test by looking directly at the lens. You should
see yourself on the “Preview Screen”.
7. After a few seconds you will see a countdown appear that will
countdown from 30 until 0. After the countdown is complete the
camera is on and taking pictures based on movement in front of
the motion sensor.
8. To view pictures recorded by the camera on the micro sd card which is in the camera depress
one of arrows for a few seconds and the camera will switch into a “view mode”. You may
advance the pictures by depressing the arrow keys. When you are finished previewing pictures
the camera will resume normal operation after no buttons are depressed for a few seconds.
The camera can also be connected to a computer via USB cable. To connect to a computer via
USB cable, slide the on and off swicth to “off”. insert the Micro USB cable to the camera and then
to a computer. You will see a connection icon appear on the camera screen. You can now look
at pictures on your personal computer with your favorite JPEG viewer.
9. Mounting can be done with the nylon strap provided or
by screw or nail through the screw or nail hanger located on
top of the camera.
Questions or comments please call
866-252-3811
www.bresserusa.com
Thank you for your purchase!
Product Registration
Please mail to:
Explore Scientific® /Bresser®
621 Madison Street
Springdale, Arkansas 72762
We wish to thank you for purchasing an Explore Scientific®/Bresser® product. Please take the time to fill out and mail in this product registration form, or go on line to
http://explorescientific.com/customerservice/productregistration.php and fill out the product registration web form.
Name
Address
Address 2
City
State/Zip
Phone
Email
Date Purchased
Store Name
Model#
Serial#
Gift? Yes No
Would you like to receive more information about Explore Scientific®/Bresser® Products?
Yes No
Email:____________________________________________________
We appreciate your comments for future improvements of our products and services.
Please email your suggestions to:
service@explorescientific.com
Or call us at: 866.252.3811
www.explorescientificusa.com
www.bresserusa.com
© 2008-2016 Explore Scientific LLC
All Rights Reserved
9 10
11