Operation Manual

47
EN
4.1.10 Format SD card
NOTE: When executing this action, all data on the card
will be erased irrevocably! Perform a backup of your data
fi r s t .
a) Press MENU to display the settings menu.
b) Press or to select SD CARD and press OK.
c) Press or to select ERASE ALL and press OK.
d) Press or to select T.L. Quality.
e) Press OK to start formatting your SD card. During
formatting the message "Deleting ..." appears on the
screen.
f) Press MENU to exit the selection screen.
4.1.11 Set date format and date
The valid value for years is between 2009 and 2035.
Default setting may vary from the current date. Provided
that date and time settings need to be changed, the
steps are as follows:
a) Press MENU to display the settings menu.
b) Press or to select Setting and press OK.
c) Press or to select Date format and press OK.
d) Press or to select the desired date format and
press OK.
e) Press or to select Setup Date and press OK.
f) Press or to change the current value or or to
switch the input fi eld.
g) Press OK to save the current setting.
h) Press MENU to exit the selection screen.