Operation Manual

2. Caution!

• The working voltage of the camera is 12V. The camera

is supplied by 8 AA batteries*.

• Please install batteries according to shown polarity.

• For camera operation an SD-card* (up to 32 GB) is

needed.

• Please unlock the write-protect before inserting the

SD-card.

• Please insert the SD-card when the power switch is at

OFF position before testing the camera. The camera

has no internal memory for saving images or videos.

• Please do not insert or take out the SD-card when the

power switch is at ON position.

• It is recommended to use the camera to format the

SD-card when used for the ﬁ rst time.

• The camera will be in USB mode when connected to

a USB port of a computer. In this case, the SD-card

functions as a removable disk.

• In the TEST mode, the camera will shut down automa-

tically after 3 minutes if no operation is done. Please

turn on the power again if you want to continue to work

with the camera.

• Please ensure sufﬁ cient power when having ﬁ rmwa-

re upgrade, otherwise the upgrade process could be

*not included with your purchase

interrupted incorrectly. If any fault occurs after impro-

per upgrading process, the camera may stop function

properly.