Users Manual
2020
If the problem still cannot be solved after troubleshooting,
please contact us at service_global@breo.com
Symptom
Possible cause
Basic solution
Power-on failure
Check whether the
battery level is too low
If yes, please charge the
battery timely
①
If yes, please charge
the battery timely
②
Please raise the
volumn if so.
Low massage
intensity
Storage
When the device has not been used for over 3 months, take out
and recharge it before use. Do not place it next to a wall or on
the ground or rooftop.
Make sure the room is well-ventilated. Keep the massager away
from direct sunlight and any corrosive gas.
EN
PROTECTION
①
check whether the
batter level is low
②
Please check whether
the volumn of your
device gets to low