Operation Manual

2. Using DIP switches (11) 1 through 5, set a system code.
3. Close the battery compartment (10).
Setting the system code on the switch outlet
1. Unscrew the screw (16) on the cover (13) using the right
sized Phillips head screwdriver.
2. Sightly lift the cover (13) over the screw opening (12) and
swivel it outward.
3. Using DIP switches (14) 1 through 5, set the same system
code used for the remote control.
Assigning the switch outlet to an operating button
1. Using DIP switches (14) A through E, set an operating
button on the remote control.
DIP switch E is not assigned.
3
12 13 14 15
16
15
RCS 1000 N Comfort
079615 BA_Funkschaltset RCS 1000 N.qxp 15.09.15 14:56 Seite 15