Operating instructions

Operating instructions PM 231 E

Press the SET button (5) again, and the time display

(- : - -) behind ON TIME (24) for the entered price 1 (18)

starts  ashing. Press SET (5) to  nish the setting proce-

dure for price 1 if no second price is needed.

To enter a second price (e.g. day/night tariff) also set a

starting point for price 1  rst. While the time display is

 ashing behind ON TIME (24) for price 1 (18) press UP

button (4) to set the day of the week for the starting point

(see previous section). Now press the SET button (5) until

the hour display starts  ashing and press the UP button (4)

to set the hours for the starting point. Repeat this proce-

dure for the minute display. Finally press the SET button (5)

to  nish price 1 settings.

Set Cost/kWh (Price 2)

Setting the cost/kWh for price 2 is similar to price 1.

Ensure that at the beginning price 2 (18) is displayed.

Press the FUNC button (6) to toggle the display to show

price 2 (18) before starting the setting procedure with the

SET button (5).