Power Jet-Light 4 x 36 W IP 54 D Bedienungsanleitung GB Operating Manual F Mode d'emploi NL Handleiding E Instrucciones de Uso I Manuale d’uso CZ Návod pro obsluhu
Power Jet-Light 4 x 36 W IP 54 D Bedienungsanleitung WICHTIG: Lesen und bewahren Sie diese Bedienungsanleitung auf. Beachten und befolgen Sie die Sicherheitshinweise.
Inhaltsverzeichnis 1 2 3 4 5 6 6.1 6.2 6.3 7 8 9 10 11 Einleitung ....................................................................................................................... 5 Lieferumfang .................................................................................................................. 5 Sicherheitshinweise........................................................................................................ 5 Geräteübersicht....................................................
Power Jet-Light 4 x 36 W IP 54 1 Einleitung Diese Bedienungsanleitung muss vollständig und sorgfältig durchgelesen werden. Sie ist Bestandteil des von Ihnen neu erworbenen Produktes und enthält wichtige Hinweise für den Betrieb und die Handhabung. Es sind beim Gebrauch dieses Produktes immer alle Sicherheitshinweise zu beachten. Die Power Jet- Light 4 x 36 W ist eine Arbeitsleuchte mit Steckdosen zum Stellen, Hängen und Legen, sowie als tragbare Leuchte für den Innen- und Außenbereich geeignet.
Power Jet-Light 4 x 36 W IP 54 Zum Wechseln der Leuchtmittel muss die Arbeitsleuchte von der Netzspannung getrennt werden. Ziehen Sie den Stecker aus der Steckdose. Reparaturen dürfen nur durch eine autorisierte Fachkraft durchgeführt werden. Lassen Sie die Arbeitsleuchte vor Berührung (z.B. beim Leuchtmittelwechsel) abkühlen. Halten Sie zu jeder Seite einen Mindestabstand von 50 cm zu brennbaren Materialien ein.
Power Jet-Light 4 x 36 W IP 54 12 15 13 14 Pos. Bezeichnung Pos. Bezeichnung 12 Schutzkontaktsteckdosen 14 Leitungseinführung inkl. Biegeschutz 13 Gehäuse 15 EIN/ AUS Schalter 5 Technische Daten Gerät Schutzart: Stromversorgung: Kabel: Kabellänge: Abmessungen (H x B x T): Gewicht: Power Jet - Light 4 x 36 W Art. Nr. 1 17262 0 IP 54 (spritzwassergeschützt, staubgeschützt) 230 V~ 50 Hz Gummikabel H07RN-F 3G1,5 ca. 5 m ca.
Power Jet-Light 4 x 36 W IP 54 6.1 Erste Inbetriebnahme Schritt Tätigkeit 1 Stecken Sie die Standbügel auf den Haltebügel. Verschrauben Sie die Bügelkonstruktion mit den Bügelschrauben. 2 Pos. 6 Bezeichnung 6 Standbügel (Bügelkonstruktion) 9 Verstellschraube 16 Distanzhülse 13 Gehäuse (Leuchtenkörper) 9 16 13 Befestigen Sie den Leuchtenkörper in der Mitte der Bügelkonstruktion. Verwenden Sie hierzu die Distanzhülsen und die Verstellschrauben.
Power Jet-Light 4 x 36 W IP 54 Schritt Tätigkeit 3 Ziehen Sie nun das Leuchtmittel nach oben aus der Fassung. Pos. 4 Bezeichnung 4 Leuchtmittel 5 Fassung 5 4 Setzen Sie das neue Leuchtmittel nach unten mit sanftem Druck ein. 5 Legen Sie die Schutzabdeckung auf das Gehäuse. Schrauben Sie die 4 Schutzabdeckungsschrauben in die Schutzabdeckung. Schieben Sie die Dichtung wieder über die Schutzabdeckung. WICHTIG: Achten Sie auf korrekten Sitz der Dichtung zwischen Gehäuse und Schutzabdeckung. 6.
Power Jet-Light 4 x 36 W IP 54 Schritt 4 Tätigkeit Klemmen Sie die Leitung ab. Lösen Sie hierzu die Zugentlastung und drücken Sie die Federkraftklemme am Klemmenblock. 8 Pos. 19 8 20 Bezeichnung Zuleitung 19 Zugentlastung 20 Federkraftklemme 21 Klemmenblock 21 5 Lösen Sie die Leitungseinführung, indem Sie diese entgegen des Uhrzeigersinns drehen. 13 Pos. Bezeichnung 13 Gehäuse 14 Leitungseinführung inkl. Biegeschutz 14 6 7 Ziehen Sie die alte Zuleitung heraus.
Power Jet-Light 4 x 36 W IP 54 8 Entsorgung Am Ende der Lebensdauer des Produktes darf dieses nicht im normalen Hausmüll entsorgt werden. Erkundigen Sie sich bei Ihrer Stadt- oder Gemeindeverwaltung nach Möglichkeiten einer umwelt- und sachgerechten Entsorgung des Gerätes.
Power Jet-Light 4 x 36 W IP 54 GB Operating Manual IMPORTANT: Read and maintain this operating manual. Observe and follow the security instructions.
Table of Contents 1 2 3 4 5 6 6.1 6.2 6.3 7 8 9 10 11 Introduction...................................................................................................................14 Product Contents.......................................................................................................... 14 Security Instructions ..................................................................................................... 14 Device overview ..........................................................
Power Jet-Light 4 x 36 W IP 54 1 Introduction This operating manual should be read completely and carefully. It is part of your newly acquired product contains important instructions for the operation and handling. All the security instructions are to be observed while using the product. The Power Jet- Light 4 x 36 W is a work lamp with sockets is suited for placing, hanging and positioning as also as portable lamp for indoors and outdoors.
Power Jet-Light 4 x 36 W IP 54 Regularly check the work lamp for damages. The work lamp must be separated from the mains voltage in order for it to be replaced. Pull the connector from the socket. Repairs should be carried out only by authorized personnel. Let the work lamp cool down before touching it (for example during replacement of the illuminant). Observe a minimum distance of 50 cm on each side to combustible materials. Damaged cable line cannot be replaced.
Power Jet-Light 4 x 36 W IP 54 12 15 13 14 Pos. Name Pos. Name 12 Shockproof socket 14 Bush including bending protection 13 Casing 15 ON/ OFF Switch 5 Technical Data Device Protection type: Power supply: Cable: Cable length: Dimensions (H x B x T): Weight: Power Jet - Light 4 x 36 W Type Nr.
Power Jet-Light 4 x 36 W IP 54 6.1 Initial Operation Step Activity 1 Plug the standing bracket on to the retaining bracket. Bolt the U-Bolt structure with the U-Bolts. 2 Pos. 6 Name 6 Standing bracket (U-Bolt structure) 9 Adjusting screw 16 Bolt spacer 13 Casing (Lamp body) 9 16 13 Fasten the lamp body in the middle of the U-bolt structure. For this purpose use the bolt spacer and the adjusting screw. The light bracket can be set through the adjusting screw.
Power Jet-Light 4 x 36 W IP 54 Step Activity 3 Now pull the illuminant upwards towards the clamp Pos. 4 Name 4 Illuminant 5 Clamp 5 4 Insert the new illuminant downwards with gentle pressure. 5 Lay the protective cover on the casing. Screw in the 4 protective cover bolts into the protective cover. Push the seal over the protective cover again. IMPORTANT: Please note the correct position of the seal between the casing and the protective cover. 6.3 Replace wiring.
Power Jet-Light 4 x 36 W IP 54 Step 4 Activity Disconnect the wire. For this purpose, detach the pull relief and press the wire button to the wire block. 8 19 20 Pos. Name 8 Wiring 19 Pull relief 20 Wire button 21 Wire block 21 5 Detach the bush by rotating in the anti-clockwise pattern. 13 Pos. Name 13 Casing 14 Bush including bending protection 14 6 7 Unscrew the old wiring.
Power Jet-Light 4 x 36 W IP 54 9 Error list Error An illuminant is not shining anymore Possible reason(s) Remedy There is a defect in the illuminant Replace illuminant Work lamp is not functioning - Defective power supply or network cable - No network connection - Switch is defective - Check the earthed 230 V~ socket - Check the extension cable IMPORTANT: All further repairs should be carried out only by professionals. 10 Guarantee and Service We guarantee 2 years for this item.
Power Jet-Light 4 x 36 W IP 54 F Mode d'emploi IMPORTANT : Lire et garder ce mode d'emploi. Suivre les indications de sécurité.
Table de matières 1 2 3 4 5 6 6.1 6.2 6.3 7 8 9 10 11 Introduction .................................................................................................................. 23 Volume de la livraison .................................................................................................. 23 Indications de sécurité.................................................................................................. 23 Vue d'ensemble de l'appareil ...............................................
Power Jet-Light 4 x 36 W IP 54 1 Introduction Ce mode d'emploi doit être lu complètement et soigneusement. Elle fait partie du produit acquis par vous et contient des indications importantes pour l'activité et le maniement. Il faut suivre toujours toutes les indications de sécurité lors de l'utilisation de ce produit.
Power Jet-Light 4 x 36 W IP 54 Contrôler régulièrement la lampe de travail s’il y a des endommagements. Pour changer des ampoules il faut débrancher la lampe de travail. Tirer le connecteur de la prise. Les réparations ne peuvent être faites que par une personne qualifiée autorisée. Laisser refroidir la lampe de travail avant de la toucher (p. ex. pour remplacer les ampoules). Respectez une distance minimale de 50 cm entre la lampe et du matériel combustibles à chaque côté.
Power Jet-Light 4 x 36 W IP 54 12 15 13 14 N° Désignation N° Désignation 12 Prises avec contact de mise à la terre 14 Introduction du câble avec protection contre le courbage 13 Boîtier 15 Commutateur Marche/Arrêt 5 Spécifications Appareil Genre de protection : Alimentation : Câble : Longueur du câble : Dimensions (H x L x P) : Poids : Power Jet - Light 4 x 36 W N° Réf. 1 17262 0 IP 54 (protégé contre les projections d’eau) 230 V~ 50 Hz Câble en caoutchouc H07RN-F 3G1,5 env. 5 m env.
Power Jet-Light 4 x 36 W IP 54 6.1 Première mise en service Etape Activité 1 Mettre le support sur l’étrier de support. Visser la construction d’étrier avec les boulons étrier. 2 N° 6 Désignation 6 Support (Construction d’étrier) 9 Vis de déplacement 16 Douille d’écartement 13 Boîtier (Châssis de lampe) 9 16 13 Fixer le châssis de lampe au milieu de la construction d’étrier. Pour cela utiliser les douilles d’écartement et les vis de déplacement.
Power Jet-Light 4 x 36 W IP 54 Etape Activité 3 Retirer maintenant l’ampoule vers le haut de la douille. N° 4 Désignation 4 Luminaire 5 Douille 5 4 Insérer le nouveau luminaire vers le bas avec une pression douce. 5 Mettre la couverture de protection sur le boîtier. Visser les 4 vis de la couverture de protection. Poussez le joint à nouveau sur la couverture de protection. IMPORTANT : Faire attention à l’ajustement correct du joint entre le boîtier et la couverture de protection 6.
Power Jet-Light 4 x 36 W IP 54 Etape 4 Activité Déconnecter le câble. Pour cela détacher le délestage de traction et appuyer sur la touche de borne sur la plaque à bornes. 8 N° 19 20 Désignation 8 Câble d’alimentation 19 Délestage de traction 20 Touche de borne 21 Plaque à bornes 21 5 Détacher l'introduction du câble en la tournant contre le sens d’horloge. 13 N° Désignation 13 Boîtier 14 Introduction du câble avec protection contre le courbage 14 6 7 Retirer l’ancien câble.
Power Jet-Light 4 x 36 W IP 54 8 Traitement des déchets À la fin de la durée de fonctionnement du produit on ne peut pas éliminer ce produit dans les déchets domestiques normaux.
Power Jet-Light 4 x 36 W IP 54 NL Handleiding BELANGRIJK: Lees deze handleiding en bewaar ze. Neem de veiligheidsaanwijzingen in acht en respecteer ze.
Inhoudsopgave 1 2 3 4 5 6 6.1 6.2 6.3 7 8 9 10 11 Inleiding ........................................................................................................................ 32 Leveringspakket ........................................................................................................... 32 Veiligheidsaanwijzingen ............................................................................................... 32 Overzicht van het apparaat ..................................................
Power Jet-Light 4 x 36 W IP 54 1 Inleiding Deze handleiding moet volledig en zorgvuldig gelezen worden. Ze is deel van een nieuw door U aangeschaft product en bevat belangrijke aanwijzingen voor het gebruik en onderhoud. Bij het gebruik van dit product moeten altijd alle veiligheidsaanwijzingen gerespecteerd worden. De Power Jet-Light 4 x 36 W is een werklamp met stekkerdozen om te plaatsen, te hangen en te liggen, en ook als draagbare lamp voor binnen en buiten geschikt.
Power Jet-Light 4 x 36 W IP 54 Voor het wisselen van de lampen moet de werklamp van de netspanning ontkoppeld worden. Trek de stekker uit de stekkerdoos. Reparaties mogen enkel door een geauthorizeerde vakman uitgevoerd worden. Laat de werklamp vóór het aanraken (bv bij het vervangen van de lamp) afkoelen. Respekteer een minimumafstand van 50 cm aan beide kanten voor brandbare materialen.
Power Jet-Light 4 x 36 W IP 54 12 15 13 14 Pos. 12 Benaming Veiligheidscontactstekkerdozen Pos. 14 Benaming Snoeraansluiting incl. buigbescherming 13 Kast 15 AAN/UIT (EIN/AUS) schakelaar 5 Technische informatie Apparaat Veiligheidscategorie: Stroomvoorziening: Kabel: Kabellengte: Afmetingen (H x B x D): Gewicht: Power Jet - Light 4 x 36 W Art. Nr. 1 17261 0 IP 54 (beschermd tegen spatwater en stof) 230 V~ 50 Hz Rubberkabel H07RN-F 3G1,5 ca. 5 m ca.
Power Jet-Light 4 x 36 W IP 54 6.1 Eerste ingebruikname Stap Activiteit 1 Steek de staanbeugel op het handvat. Schroef de beugelconstructie met de beugelschroeven vast. 2 Pos. 6 Benaming 6 Staanbeugel (beugelconstructie) 9 Verstelschroef 16 Afstandshuls 13 Kast (lampenkast) 9 13 16 Bevestig de lampenkast in het midden van de beugelconstructie. Gebruik daarvoor de afstandshuls en de verstelschroeven. Aan de hand van de verstelschroeven kan de lichthoek ingesteld worden.
Power Jet-Light 4 x 36 W IP 54 Stap 3 Activiteit Trek nu de lamp naar boven uit de fitting Pos. 4 Benaming 4 Lamp 5 Fitting 5 4 Plaats met zachte druk de nieuwe lamp naar onder. 5 Leg het beschermingspaneel op de lampenkast. Schroef de 4 beschermingspaneelschroeven in het beschermingspaneel. Schuif de pakking terug over het beschermingspaneel. BELANGRIJK: Zorg voor een juiste plaatsing van de pakking tussen de kast en het beschermingspaneel. 6.
Power Jet-Light 4 x 36 W IP 54 Stap 4 Activiteit Klem het snoer af. Maak hiertoe de trekontlasting los en duw op de klemknop aan het klemblok. 8 Pos. 19 20 8 Benaming Snoer 19 Trekontlasting 20 Klemknop 21 Klemblok 21 5 Maak de snoeraansluiting los, door ze tegen de klok in te draaien. 13 Pos. Benaming 13 Kast 14 Snoeraansluiting incl. buigbescherming 14 6 7 Trek het oude snoer uit.
Power Jet-Light 4 x 36 W IP 54 9 Lijst van defecten Defect Mogelijke oorza(a)k(en) Oplossing Een lamp brandt niet meer De lamp is defect De lamp vervangen Werklamp functioneert niet - Stroomvoorziening of netkabel is - Controleer de geaarde defect 230 V~ stekkerdoos. - Geen netverbinding - Controleer het verlengingssnoer - Schakelaar is defect BELANGRIJK: Alle verdere reparaties mogen enkel door een geauthoriseerde electriciteitsvakman uitgevoerd worden.
Power Jet-Light 4 x 36 W IP 54 E Instrucciones de uso IMPORTANTE: Lea y conserve estas instrucciones de uso. Atienda y siga las indicaciones de seguridad.
Índice de contenidos 1 2 3 4 5 6 6.1 6.2 6.3 7 8 9 10 11 Introducción.................................................................................................................. 41 Inventario ..................................................................................................................... 41 Indicaciones de Seguridad ........................................................................................... 41 Vista General del Aparato .............................................
Power Jet-Light 4 x 36 W IP 54 1 Introducción Estas instrucciones de uso deben ser leídas cuidadosamente y en forma completa. Son una parte del producto que usted acaba de adquirir, y contienen indicaciones importantes respectivas a su funcionamiento y manejo. Todas las indicaciones de seguridad deben ser observadas siempre al usar este producto.
Power Jet-Light 4 x 36 W IP 54 Las reparaciones sólo pueden ser llevadas a cabo por personal autorizado. Deje enfriar la lámpara de trabajo antes de tocarla (p.ej. para el cambio de tubos). Mantenga una distancia mínima de 50 cm a cada lado respecto de materiales combustibles. Un cable de alimentación dañado no puede reemplazarse. La lámpara de trabajo debe ser adecuadamente desechada. Nunca conecte múltiples enchufes en yuxtaposición. Procure un lugar de apoyo seguro para la lámpara de trabajo.
Power Jet-Light 4 x 36 W IP 54 12 15 13 14 Nro. Descripción Nro. Descripción 12 Enchufes con protección al contacto 14 Entrada de corriente incl. protección contra flexión 13 Caja 15 Interruptor Encendido (EIN) / Apagado (AUS) 5 Especificaciones Técnicas Aparato Tipo de protección: Suministro energético: Cable: Largo del cable: Medidas (Altura x Ancho x Largo): Peso: Power Jet - Light 4 x 36 W Art. Nr.
Power Jet-Light 4 x 36 W IP 54 6.1 Primer Encendido Paso Acción 1 Encastre el pie con el soporte de apoyo. Atornille la construcción de soporte con tornillos en U. 2 Nro. 6 Descripción 6 Pie (construcción de soporte ) 9 Tornillo de ajuste 16 Espaciadores 13 Caja (Lámpara) 9 16 13 Fije la lámpara en el medio de la construcción de soporte. Utilize para ello los espaciadores y los tornillos de ajuste. Con los tornillos de ajuste también puede ajustarse el angulador.
Power Jet-Light 4 x 36 W IP 54 Paso Acción 3 Quite el tubo de luz del portalámparas tirando hacia arriba. 4 Nro. Descripción 4 Tubo de Luz 5 Portalámparas 5 4 Inserte el nuevo tubo aplicando presionando suavemente. 5 Coloque la cubierta de seguridad sobre la caja. Atornille los 4 tornillos con cubierta de seguridad a la cubierta de seguridad. Presione el sello nuevamente sobre la cubierta de seguridad. IMPORTANTE: Observe la correcta posición del sello entre la caja y la cubierta de seguridad.
Power Jet-Light 4 x 36 W IP 54 Paso 4 Acción Desconecte la alimentación. Libere para ello el alivio de tensión y presione la abrazadera de resorte contra el bloque terminal. 8 Nro. 19 8 20 Descripción Cable de alimentación 19 Alivio de tensión 20 Abrazadera de resorte 21 Bloque terminal 21 5 Libere la entrada de corrente girando en sentido antihorario. 13 Nro. Descripción 13 Caja 14 Entrada de corriente incl. protección contra flexión 14 6 7 Retire el viejo cable de alimentación.
Power Jet-Light 4 x 36 W IP 54 9 Lista de Errores Error Un tubo ya no ilumina Causa(s) Posible(s) El tubo tiene una falla Solución Cambiar el tubo La lámpara de trabajo no funciona - Fallas en el suministro eléctrico - Revise el enchufe a tierra de o el cable principal 230 V~ . - No hay conección a la red - Revise el alargador - El enchufe no funciona IMPORTANTE: Toda reparación ulterior debe ser llevada a cabo por electricistas competentes autorizados.
Power Jet-Light 4 lampade da 36W IP 54 I Manuale d’uso IMPORTANTE: Leggere e conservare il presente manuale d’uso. Osservare ed attenersi alle informazioni di sicurezza.
Indice 1 2 3 4 5 6 6.1 6.2 6.3 7 8 9 10 11 Introduzione.................................................................................................................. 50 Dotazione di serie......................................................................................................... 50 Informazioni di sicurezza .............................................................................................. 50 Panoramica delle funzioni .............................................................
Power Jet-Light 4 x 36 W IP 54 1 Introduzione Leggere attentamente il presente manuale d’uso in versione integrale. Esso costituisce parte integrante del prodotto che avete appena acquistato e contiene informazioni importanti relative al funzionamento ed al maneggio. Osservare sempre rigorosamente le informazioni di sicurezza durante l’uso del prodotto.
Power Jet-Light 4 x 36 W IP 54 Non utilizzare la lampada in ambienti esposti al rischio di esplosione, dove siano presenti liquidi, gas o polveri infiammabili. Tenere la lampada lontana dalla portata di bambini Controllare regolarmente la presenza di eventuali danni sulla lampada per posto di lavoro. Prima di sostituire le lampade, staccare la lampada dalla presa di corrente. Staccare la spina dalla presa. Eventuali riparazioni devono essere effettuate solo dal centro assistenza autorizzato.
Power Jet-Light 4 x 36 W IP 54 12 15 13 14 Rif. Indicazione Rif. 12 Presa con messa a terra 14 Passacavo con guaina flessibile 13 Scocca 15 Interruttore acceso/spento (ein/aus) 5 Indicazione Scheda tecnica Apparecchio Tipo di protezione: Alimentazione: Cavo: Lunghezza cavo: Dimensioni (H x L x P): Peso: Power Jet - Light 4 x 36 W Art. Nr. 1 17262 0 IP 54 (antispruzzo, antipolvere) 230 V 50 Hz cavo in gomma H07RN-F 3G1,5 ca. 5 m ca.
Power Jet-Light 4 x 36 W IP 54 6.1 Prima accensione Fase Intervento 1 Infilare l’impugnatura nei due piedistalli. Fissare la struttura così composta con le viti di regolazione. 2 Rif. 6 9 Indicazione 6 Staffa impugnatura (struttura portante) 9 Vite di regolazione 16 Distanziatore 13 Scocca (corpo illuminazione) 16 13 Fissare il corpo di illuminazione al centro della struttura portante, servendosi dei distanziatori e delle viti di regolazione.
Power Jet-Light 4 x 36 W IP 54 Fase Intervento 3 Sollevare ora la lampada estraendola dal portalampada. Rif. 4 Indicazione 4 Lampada 5 Portalampada 5 4 Inserire la lampada di ricambio spingendola verso il basso con una leggera pressione. 5 Rimettere il coperchio di protezione sulla scocca, fissare le 4 viti del coperchio sullo stesso. Far aderire la guarnizione al coperchio di protezione.
Power Jet-Light 4 x 36 W IP 54 Fase 4 Intervento Stringere il cavo con un serracavo. Svitare il serracavo e spingere il tasto del morsetto sulla morsettiera. 8 Rof. Indicazione 19 20 8 21 5 Cavo di alimentazione 19 Serracavo 20 Tasto del morsetto 21 Morsettiera Svitare il passacavo, girandolo in senso antiorario. Rif. 13 Indicazione 13 Scocca 14 Passacavo con guaina flessibile. 14 6 7 Estrarre il cavo usato.
Power Jet-Light 4 x 36 W IP 54 9 Lista errori Errore Una lampada non emette più luce Possibile(i) causa(e) La lampada è difettosa Soluzione Sostituire la lampada La lampada non dà segno di funzionamento - L’alimentazione o il cavo di rete sono difettosi - Non c’è collegamento alla rete - Verificare la presa di rete 230 V a terra - Verificare la prolunga. IMPORTANTE: Qualsiasi altro tipo di riparazione deve essere effettuato presso un centro assistenza o di elettronica autorizzato.
Power Jet-Light 4 x 36 W IP 54 CZ Návod pro obsluhu UPOZORNĚNÍ: Přečtěte a uchovejte si pečlivě tento návod pro obsluhu. Dodržujte a řiďte se bezpečnostními pokyny.
Obsah 1 2 3 4 5 6 6.1 6.2 6.3 7 8 9 10 11 Úvod............................................................................................................................. 59 Obsah dodávky ............................................................................................................ 59 Bezpečnostní pokyny ................................................................................................... 59 Přehled zařízení ......................................................................
Power Jet-Light 4 x 36 W IP 54 1 Úvod Tento návod pro obsluhu si musíte kompletně a pozorně přečíst. Je součástí Vašeho nového získaného produktu a obsahuje důležité pokyny pro provoz a manipulaci s produktem. Při používání produktu musíte neustále dodržovat všechny bezpečnostní předpisy. Power Jet- Light 4 x 36 W je pracovní lampa se zásuvkami vhodná k postavení, zavěšení nebo položení, rovněž se může použít jako přenosné svítidlo do exteriéru a interiéru.
Power Jet-Light 4 x 36 W IP 54 Kontrolujte pravidelně pracovní lampu kvůli jejímu možnému poškození. Při výměně osvětlovacích prostředků se musí pracovní lampa odpojit od síťového napětí. Vytáhněte zástrčku ze zásuvky. Opravy může provádět pouze kvalifikovaný odborný personál. Nechte před kontaktem s pracovní lampou (např. při výměně osvětlovacích prostředků) lampu vychladnout. Udržujte na každé straně minimální odstup 50 mm od hořlavých materiálů.
Power Jet-Light 4 x 36 W IP 54 12 15 13 14 Pol. 12 Název Zásuvky s ochranným kontaktem Pol. 14 Název Připojení vedení vč. ochrany před ohybem 13 Pouzdro 15 Vypínač ZAP./VYP 5 Technická data Přístroj Druh ochrany: Napájení proudem: Kabel: Délka kabelu: Rozměry (Š x V x H): Hmotnost: Power Jet - Light 4 x 36 W Č. prod. 1 17262 0 IP 54 (s ochranou proti stříkající vodě a prachu) 230 V ~ 50 Hz Gumový kabel H07RN-F 3G1,5 cca 5 m ca.
Power Jet-Light 4 x 36 W IP 54 6 Obsluha a montáž Dodržujte následující pokyny, obzvlášť bezpečnostní pokyny, abyste zamezili chybám obsluhy a možným defektům. 6.1 Krok 1 První uvedení do provozu Činnost Zasuňte rukojeť stojanu do držadla. Sešroubujte konstrukci rukojetě pomocí šroubů rukojetě. 2 Pol. 6 9 16 13 Název 6 Rukojeť stojanu (konstrukce rukojetě) 9 Regulační šroub 16 Distanční pouzdro 13 Pouzdro (těleso svítidla) Upevněte těleso svítidla v středě konstrukce rukojetě.
Power Jet-Light 4 x 36 W IP 54 Krok Činnost 3 Vytáhněte teď svítidlo z objímky směrem nahoru. Pol. 4 Název 4 Svítidlo 5 Obruba 5 4 Vložte jemným stisknutím směrem dolů nové svítidlo. 5 Položte ochranný kryt na pouzdro. Našroubujte 4 šrouby ochranného krytu z ochranného krytu. Nasuňte těsnění zpět na ochranný kryt. UPOZORNĚNÍ: Dávejte pozor na správné osazení těsnění mezi pouzdrem a ochranným krytem. 6.
Power Jet-Light 4 x 36 W IP 54 Krok 4 Činnost Uvolněte svorky rozvodu. Uvolněte k tomu odlehčení od tahu a stiskněte tlačítko pro svorky na bloku se svorkami. 8 Pol. 19 8 20 Název Přívod 19 Odlehčení od tahu 20 Tlačítko pro svorky 21 Blok se svorkami 21 5 Uvolněte připojení vedení tím způsobem, že jej budete otáčet v protisměru hodinových ručiček. Pol. 13 Název 13 Pouzdro 14 Připojení vedení vč. ochrany před ohybem 14 6 7 Vytáhněte staré spojovací vedení ven.
Power Jet-Light 4 x 36 W IP 54 9 Seznam závad Závada Jedno svítidlo nesvítí Možná příčina Svítidlo je defektní Odstranění Výměna svítidel Pracovní lampa je nefunkční - Napájení proudem nebo síťový kabel defektní - žádné napětí ze sítě - Vypínač je defektní - Zkontrolujte uzemněnou zásuvku 230 V~ - Zkontrolujte prodlužovací kabel UPOZORNĚNÍ: Všechny ostatní opravy může provádět jenom odborně zaškolený elektrikářský personál. 10 Záruka a servis Na tento produkt poskytujeme záruku v trvání 2 let.
Hugo Brennenstuhl GmbH & Co. KG D-72074 Tübingen www.brennenstuhl.