User manual

6. Only use the supplied power supply unit and cable to power the device.
Use of any other power supply unit can cause damage to the battery or an explosion!
7. If the protective cover is broken, it should be replaced with an original Brennenstuhl® protective
cover before further use of the oodlight.
8. Disconnect the power supply unit from the mains power and switch the oodlight o before
cleaning.
9. To avoid dazzling or blinding, do not look directly into the light.
INTENDED USE
This LED oodlight is suitable for general indoor and outdoor lighting.
SETTING UP AND SWITCHING ON THE FLOODLIGHT
Place the oodlight on a dry and level surface.
The inclination of the oodlight is adjustable.
To do so, loosen the lateral quick release E, turn the
oodlight head into the desired position and lock the
quick release E again.
SWITCHING THE FLOODLIGHT ON/OFF BATTERY OPERATION
Use the switch A on the back to switch the oodlight on.
Press the switch multiple times to set the brightness to 100%, then 50%, then 10% and then "o".
The lower the brightness selected, the longer the oodlight will burn.
If the switch is left in any of its "on" positions for longer than 3 seconds, then pressing it once again
will always turn it o.
A On/O and function switch
D DC charging socket
B USB output (power bank)
E Quick release
C Battery status and charge indicator
130°
E
Output
5V 2A
D
Operating instructions DARGO
8
041518 BA_DARGO.qxp 07.08.18 18:25 Seite 8