User manual

6
D
Operating Instructions Mobile Battery-Operated LED Chip Light
BATTERY STATUS DISPLAY C:
Displaysthecurrentchargingstatusofthebattery,or,howmuchenergyisstillavailable.
Ifall4LEDsarelit,thebatteryisfullycharged.Whenthebatteryisalmostempty,theLEDlight
ashes5timesandthebatterystatusindicatorashessteadily.Thelightwillthenremainonfor
approx.10minutesat50%brightness,untilthedeepdischargeprotectionswitchesthelighto.
Thisprovidessucienttimetoreplacethebatteryorstopworking.
CHARGING DEVICES WITH A USB CHARGING CABLE E.G.SMARTPHONES:
Suitableforproductswithachargecurrentofmax.2100mA.ForchargingthedeviceviaaUSB
chargingcableandtheUSBchargingport(D)onthetopofthebattery.
Aftercharging,putthecapbackon.
CHARGING THE BATTERY:
• Toensureoptimumfunctionality,weensurecompletelydischargingthebatteryduringinitial
useandthenfullychargingit.
• Thechargingsocket(E)islocatedonthetopofthebatteryunderthecap.
• Thebatterychargingstatuscanbedeterminedbyreadingthebatterystatus(seedescription
above).Ifall4LEDsarelit,thebatteryisfullycharged.
• Whilechargingthebattery,theemitter/USBcannotbeoperated.
• Thebatterycanalsobechargedseparatelyfromthelamp,seealsothe"Replacingthebattery"
section.
• Ifthelampisnotinuseforlongerperiodsoftime,chargethebatteryapproximatelyevery
3monthstoensurealongbatterylife.
• Aftercharging,makesuretoclosethechargingportwiththecap.
REPLACING THE BATTERY:
Thebatterycanbequicklyandeasilyreplaced.Toremovethebattery,unlatchthetwobrackets
(F)onthetopandbottom,seedrawing.Thisway,thebatterycanbechargedwhilecontinuingto
workusingaseparatelyavailablereplacementbattery.
F
BA_ML_CA_130_IP54_150527.indd 6 28.05.15 11:48