Bruksanvisning
TROUBLESHOOTING GUIDE
ISSUE LOGO INDICATOR REMEDY
Over Voltage >260V RED
1. Remove connector
from vehicle and turn
off power
2. Wait at least one
minute
3. Turn power back on, if
problem persists
contact qualified
electrician
Under Voltage <190V FAST BLINKING RED
Over Current >60A SLOW BLINKING AMBER
Over Temperature >85C BLINKING AMBER/RED
Residual Current/Current
Leakage >25mA
FAST BLINKING AMBER
Ground Fault AMBER
Surge Current N/A
Short Circuit BLINKING RED/BLUE
Pilot Signal OFF
All Others SLOW BLINKING RED
USER MAINTENANCE INSTRUCTIONS
1) Keep the charger clean and keep the charge in a clean area.
2) Avoid moisture or water in the charger. If there is water or moisture ingress into the
charger, shut off power immediately to avoid danger, and notify the professional electrician
to carry out maintenance before next use.
3) If there is any damage to the vehicle connector, charging cable, or vehicle connector
holder, please contact the maintenance personnel immediately.
4) Use the charger properly. Do not hit or press hard on the case. If the case is damaged,
please contact a professional electrician.
5) Avoid placing the charger near hot objects and at high temperature locations and away
from dangerous substances such as flammable gases and corrosive materials.
6) Do not place external objects or heavy objects on the charger to avoid danger.
7) Avoid leaving cable on the ground
9
www.breez-EV.com 847-380-3540
sales@led-llc.com