Installation guide

BREEZE SIX-HEAD PLAYER INSTALLATION GUIDE
6
Copyright © 2014 Keywest Technology, Inc. All Rights Reserved
14563 W 96th Terrace • Lenexa KS 66215 USA • Need Support? Mailto:[e-mail]
Physical Connections
Connecting monitors to the Breeze Player:
1. Connect the mini DisplayPort adapter to the back of the Breeze Player (#13).
2. Connect the appropriate cable to the other end of the adapter.
3. Connect the cable to the display monitor or TV screen being used.
4. Repeat the above steps for each monitor or TV screen.
5. Other video ports (such as #6, #7, #10, #11) should NOT BE USED!!
Other Necessary Connections:
Ethernet:
6. Connect the Ethernet cable to the Ethernet input (#8) on the Breeze Player.
Power:
7. Plug one end of the power cord into a 110-V electrical outlet and the other end
into the Breeze Player (#14).
Optional Connection:
Speakers:
8. Connect the audio cables from the display monitor or TV to the speaker output
(#12) on the Breeze Player. The color of the jack refers to the function of the
connector:
Green – Line out: Used as a connector for speakers or headphones.
Black – RS-Out: Rear surround sound line out in 4 /5.1 /7.1 channel mode.
Orange – CS-Out: Center/ subwoofer line out in 5.1 /7.1 channel mode.
Gray – SS-Out: Side surround sound line out in 7.1 channel mode.
Pink – Microphone: Used as a connector for a microphone.
Blue – Line in: Used for connecting external audio outputting devices.