Instructions / Assembly

HOW TO USE THE
BREEO BASE
HOW TO USE
SURFACES
Scan the QR code to
watch an FAQ video
about the Breeo Base.
Take your Breeo Base out of the box and remove it from the bag.
Position it where you’d like your re pit.
Once the Base is situated, place your re pit on the Base with the
legs aligned with the corners of the base.
Once the re pit is placed on the Base, do not slide the Base across
the surface as it may scratch your surface. Also, sliding the re pit
on the Base should be avoided as it could scratch it.
Non combustible surfaces:
The Breeo Base will protect paver patios, stamped concrete,
concrete, blacktop, gravel, dirt & any other non combustible
surfaces from damage due to excessive heat.
Combustible surfaces:
The Breeo Base will provide adequate protection from damage
due to excessive heat on wood decks, composite decks, and wood
chips. However, due to the combustible nature of the surface, a
spark screen is required at all times and the rewood must stay
below the rim of the re pit at all times.
Grass:
The Breeo Base can be used on grass to add extra height to your
re pit, but it will not provide adequate protection to prevent the
grass from dying due to heat.