Instructions / Assembly

STEP 1
Remove lid, handle, and
screws from packaging.
STEP 2
Gather a athead screwdriver,
and ideally have some sort
of slot to hold the lid in place
during assembly (between
your legs works great).
STEP 3
Using your ngers, begin
threading the screws through
the lid holes into the handle.
(Lid tabs should be on
bottom, handle on top).
STEP 4
Using the athead
screwdriver, tighten the
screws in place to rmly
attach the handle to the lid.
STEP 1
Place the lid on your re pit
when the re has burned down
to ash only, or the re is out
completely.
STEP 2
Never use your lid as a snuffer.
Doing so can cause creosote
buildup and dripping, as well
as lid damage.
STEP 3
The lid is designed to make
the re pit a perfect patio table
when the re pit is not in use.
STEP 4
Using your lid to regularly
cover your re pit will prevent
premature aging and damage
to the metal.
ASSEMBLY
INSTRUCTIONS
INSTRUCTIONS
FOR USE