Instructions / Assembly

HOW TO USE
THE ASH
SHOVEL
Clean out the ashes after several burns
or when the ash has almost reached
the top of the X Airow™ system in the
bottom of the re pit. This is important
for maintaining airow and always having
a smokeless re.
STEP 1
Wait until re is out. Make sure your
re pit and coals are completely cool
before using your ash shovel. (A good
time to clean out ash is before your next
burn to allow some time for your re pit
and ashes to cool down.)
STEP 2
Take your ash shovel and put it on
the bottom on the re pit near the outer
edge of the re pit and then push the ash
toward the straight edges of the X Airow
system and around the circumference of
the re pit.
STEP 3
Lift ashes up and out. After you
push the ash toward the center, lift the
ashes up and out and repeat until your
re pit is clear. Repeat several times on
all 4 sides of the X Airow system, until
all ashes have been cleared.