Product Manual

PS150 Slimline and PS400 Slimline User Instructions 5
1.3 Installation
1. Remove the scale and indicator from the box.
2. Connect the power supply to the side of the indicator or install batteries.
Refer to section 1.4 for information on installing batteries.
1.4 Battery Installation
The Digital Receiving Scale operates with (4) “AA” batteries (Alkaline preferred). The
battery compartment is located on the underside of the indicator portion of the scale.
1. Turn the indicator over to expose the battery compartment.
2. Remove battery compartment door and insert batteries into compartment.
Make certain to observe the correct polarity.
3. Replace compartment door.
1.5 Auto Shutoff Feature
This feature makes the scale shut off after 5 minutes of non-use to conserve battery
life. You can disable this feature so the scale will operate continuously.
1. With the scale off, press and hold the UNIT button.
2. Press and hold ON, while holding the UNIT button down.
3. The display will show "8888 " and then "A_of " will appear. The auto-off feature
is now de-activated. Release the buttons.
4. To make the auto-off active again, repeat steps 1 and 2 and "A_on " will
appear. The auto-off is now enabled.
Battery compartment door