Application Guide

Timeless
TM
Print Varnish | APPLICATION INSTRUCTIONS For Foam Roller & HVLP Spray Gun
STILL NEED ASSISTANCE? 866.722.6567
Ver.201801
Step 2: Application Continued ...
Using a smooth flowing motion, spray your prints with your HVLP gun moving your hand at approximately 1 foot per 1
minute.
Pan from left to right, and right to left overlapping strokes approximately 50%.
Your prints should appear wet and slightly milky. The rst coat is the most important and should be applied as thick as
possible while avoiding dripping.
For some applications a second or even third coat may be applied if necessary.
You should allow 5-10 minutes for your previous coat to set before starting on the next. Repeat the same procedure as your rst coat for all
subsequent coats.
Step 3: Unused Timeless
Once Timeless has been removed from its original container for an extended period of time, it should not be returned to
the remainder of your gallon.
Unused or leftover Timeless must be stored in a SEPARATE absolutely air tight container. Leftover Timeless MUST be
used within 2 weeks from original opening date. Leftover Timeless should be strained for particulate before attempting
to use on a ne art print. A coffee lter or cheese cloth works perfectly for straining.
See Next Page For Video Resources
Resource From Our Blog
Breathing Color Blog
How to Use an HVLP Spray Gun to Varnish Prints
Learn how to use an HVLP spray gun from a professional
printmaker! Where to buy your spray gun, how to set it up, spraying
techniques, and photo walkthroughs.