Specifications

3
NET 30
Terms
Home Audio
section
3
45
www.mcmelectronics.com
Pre–Construction Speaker Bracket Pairs
Rugged ABS and perforated sheet metal bracket assemblies greatly ease
installation of in–wall and ceiling speakers in new construction applications.
Simply attach to wall studs or ceiling joists, prior to drywall installation, for easy
location and secure mounting of speaker systems during final installation.
3
⁄
8" lip
provides perfect finished edge for drywall thickness. Removable mesh plates
allow screw or nail mounting to virtually any stud or joist spacing, up to 40"
apart. Rectangular in–wall models may be horizontally or vertically mounted
(width listed below assumes vertical mount). All models are sold in pairs.
Compatibility: •#50-6681A: All MCM Custom Audio and most other brand
in–wall models •#50-6686A, 50-6687A: All MCM Custom Audio ceiling models,
with enclosed back–box •#50-6248, 50-6249: All MCM Custom Audio and most
other brand open back ceiling models
Speaker Speaker Min. Stud
Order # Type Size Opening Width (1-3 prs.) (4 prs.-up)
50-6681A In-wall 6
1
⁄2"10
3
⁄4" x 7
3
⁄8"13
1
⁄2" $19.95 $18.50
50-6686A Ceiling 6
1
⁄2"8" 13
1
⁄2" 19.95 17.96
50-6687A Ceiling 8" 9
5
⁄
8"15
1
⁄
2" 21.95 19.13
50-6248 Ceiling 6
1
⁄2"7
11
⁄16"13
1
⁄2" 19.95 17.96
50-6249 Ceiling 8" 9
7
⁄16"15
1
⁄2" 21.95 19.13
Versa-Tape
Pre-Construction
Wire Placement
This perforated tape is ideal for
holding low voltage cable in place
prior to drywall installation. It is
useful when the exact location of
wall plates is subject
to change, or when
the cable is installed for
long term use, without
immediate installation of a wall plate. It can also be
considered a low cost alternative to pre-construction
brackets. 200' roll.
Order # (1-3) (4-up)
50-8915 $34.95 $29.95
Compact In-Wall
Speaker System
✔Mounts in a double gang box
✔Aluminum cone
✔Rubber surround
Rugged 2
1
⁄2" driver is
mounted in an attractive
square faceplate that is the
same size as a double gang wall switch or AC outlet. When used alone, it is
perfect for moderate volume music and voice reproduction in public areas,
on kiosks or retail displays. Used in pairs, and combined with a subwoofer,
it is perfect for any high fidelity audio application including home theater
and whole-house audio. Specifications: •Power capacity: 20W/30W
RMS/peak •Frequency response: 100Hz~20KHz •Sensitivity: 85dB (W/M)
•Nominal impedance: 8ohm •Front panel dimensions: 4
7
⁄8" (H) x 5" (W)
•Mounting depth: 1
3
⁄4" •Sold individually
Order # MSRP (1-3) (4-up)
50-7908 $59.95 $34.95 $32.50
Micro In-Wall Speaker System
✔Mounts in a single gang box
✔Includes high pass capacitor
A rugged 2" full range driver
is mounted in an attractive
rectangular faceplate that is the
same size as a standard wall switch
or AC outlet. When used alone, it is perfect for voice reproduction in public areas, on
kiosks or retail displays. Used in pairs, and combined with a subwoofer, it is perfect for
any high fidelity audio application including home theater and whole-house audio.
Specifications: •Power capacity: 10W/20W RMS/peak •Frequency response:
300Hz~20KHz •Sensitivity: 85dB (W/M) •Nominal impedance: 8ohm •Front panel
dimensions: 4
5
⁄8" (H) x 3" (W) •Mounting depth: 1
3
⁄4" •Sold individually
Order # MSRP (1-3) (4-up)
50-7907 $39.95 $26.95 $25.95
Compact Ceiling Speaker System
✔Mounts in standard round ceiling box
✔Aluminum cone
✔Rubber surroud
Rugged 2
1
⁄2" driver is mounted in an attractive round faceplate that is
compatible with commonly available ceiling fan electrical boxes, such as the
B618R series from Carlon (MCM #28-17060). Use in this manner allows
inconspicuous mounting in a variety of areas where appearance is critical, or
electrical codes are an issue. When used alone, it is perfect for moderate volume
music and voice reproduction in public areas. Used in pairs, and combined with a
subwoofer, it is perfect for any high fidelity audio application including home theater and whole-house audio.
Specifications: •Power capacity: 20W/30W RMS/peak •Frequency response: 100Hz~20KHz •Sensitivity: 85dB
(W/M) •Nominal impedance: 8ohm •Front panel diameter: 5
3
⁄8" •Mounting depth: 1
3
⁄4" •Sold individually
Order # MSRP (1-3) (4-up)
50-9045 $59.95 $34.95 $32.50
8" In-Wall
Subwoofer
The perfect
addition to
in-wall and
small satellite
speaker
systems, this
is a perfect match for the MCM #50-7907 micro
in-wall speaker. The large poly cone woofer with butyl
rubber surround provides low end frequency response
essential for augmenting small in-wall and ceiling
speakers. White steel grill and PVC frame blend
seamlessly into most walls, and may be painted to
match any decor. Specifications: •Recommended
amplifier power: 25W~100W RMS •Frequency
response: 40Hz~200Hz •Impedance: 8ohm •Required
cutout: 8
3
⁄4" (W) x 8
3
⁄4" (H) •Mounting depth: 4"
•Mfr. #AS8SW •Sold individually
Order # (ea.)
51-783 $79.95
8" In–Wall Subwoofer
The perfect addition to in–wall
and small satellite speaker
systems. The dual voice coil 8"
long throw woofer features a
13.3 oz. magnet, ultra–rigid
injection molded polypropylene
cone, and rubber surround, for
outstanding low frequency
response down to 38Hz.
Included crossover allows
simplified connection of satellite speakers, with a high
pass frequency of 300Hz. White steel grill and PVC
frame blend seamlessly into most walls, and may be
painted to match any decor. Specifications: •Power
capacity: 250W max (both channels combined)
•Frequency response: 38Hz~300Hz (with included
crossover) •Crossover slope: 12dB/octave at 120Hz
•Impedance: 8ohm per channel •Dimensions (overall):
10
1
⁄
8" (W) x 14
1
⁄
8" (H) •Required cutout: 8
3
⁄
4" (W) x
12
3
⁄4" (H) •Sold individually
Order # (1–3) (4–up)
51-782 $126.00 $119.00
8" In–Wall
Subwoofer
The perfect addition
to in–wall, ceiling and
small satellite speaker
systems, this is a
perfect match any
installed speaker
system of 6
1
⁄2" or less.
Features: •Dual
voice coil 8" long throw woofer •30 oz. magnet
•Ribbed treated paper cone •Foam surround •Ported
front baffle •Dual channel 12dB/octve low pass
crossover •Feed through connections satellite
speakers (full range) •White steel grill and PVC
frame Specifications: •Power capacity: 125W/250W
max (both channels combined) •Frequency response:
40Hz~500Hz (with included crossover) •Crossover
slope: 12dB/octave •Impedance: 8ohm per channel
•Dimensions (overall): 10" (W) x 14
1
⁄8" (H) •Required
cutout: 8
3
⁄4" (W) x 12
3
⁄4" (H) •Mounting depth 3
3
⁄4"
•Sold individually
Order # (1–3) (4–up)
50-6369 $59.95 $54.95
Speakers mounted at AC receptacle or wall switch
height, will virtually disappear into the room.
C53_pg_044-045 8/11/08 11:35 AM Page 45