User Manual

8
7. Operating Instruction
Open the battery cover and install 5 *1.5V “LR44” cell
battery according the polarity marks in the battery compartment.
Power on the meter, and then select the suitable
measurement mode according to the object to be measured.
Please refer to the material table in the last page.
Remove the protective cap to expose the electrode pins,
carefully push the electrode pins as far as possible into the
materials under test. Take several readings in several locations
on the material for the best representation of the amount of
moisture present. The measured values will be displayed on the
LCD.
When the low battery icon” ”appears, replace the
meter's battery.
8. Button Functions
8.1
Power On/Off button
During OFF mode, press this button to power on the meter.
During ON mode, press this button one time to turn on/off the
auto power off function.
During ON mode, long press this button to turn off the meter.
MODE Button
When the meter is on, press the MODE button to select the
suitable measurement mode according to the object to be
measured. (Please refer to the material table in the last page)
Long press this button for around 3 seconds to switch the
temperatures or .
Flashlight ON/OFF
In measurement mode, press this button to turn on or turn off the