DUAL MOISTURE METER Owner's Manual Please read this user manual thoroughly before using this meter and keep it handy for future reference
Contents 1.Safety 2 2.Application 3 3.Features 3 4. Specifications 4 5. Meter Description 5 6. LCD Display Description 6 7. Operating Instruction 7 8. Button Functions 7 9. Notes 9 10. Accessories 9 11.
1. Safety Read the following safety information carefully before attempting to operate or service the meter. Use the meter only as specified in this manual; otherwise, the readings provided by the meter may be impaired. Working environment conditions Operating Temperature: 0 ~50 /32 ~122 Operating Humidity: 0%~85% Maintenance: Periodically wipe the body with a dry cloth. Do not use abrasives or solvents on this instrument.
2. Application This moisture meter is designed for testing moisture levels in wood and building materials. Combining the micro controller technology and integrated characteristics for 4 material groups increases the accuracy of measurement. It is widely used for measuring the moisture level in the in the rough professional environment. 3.
Other materials: ±0.5 Temp. Accuracy ±1 /1.8 For M1, M2 and M3: Green = 0 to 22%, Yellow = Moisture level indication 22.1 to 51%, RED = > 51% For M4: Green = 0 to 0.8%, Yellow = 0.9 to 2.0%, RED = > 2.0% LED lighting Auto Power Off √ Meter shuts off automatically after 2 minutes of inactivity Power Supply 5*LR44 1.5V batteries Operating Environment 0 50 /32 122 ; 0 85 %RH Size 129.8*55.8*26.5mm Weight 92g Pro tip: 1.
LED ON/OFF button Power ON/OFF button Temperature sensor LED lighting Measurement electrode pins LCD display MODE button HOLD button Protective cap Nameplate Battery cover 5
6.
7. Operating Instruction Open the battery cover and install 5 *1.5V “LR44” cell battery according the polarity marks in the battery compartment. Power on the meter, and then select the suitable measurement mode according to the object to be measured. Please refer to the material table in the last page. Remove the protective cap to expose the electrode pins, carefully push the electrode pins as far as possible into the materials under test.
flashlight. HOLD button In measurement mode, press this button momentarily to enter to HOLD mode, the HOLD icon appears on the upper left LCD display.
MAX icon will appear on the upper left LCD display. 9. Notes This meter has already been calibrated before delivery. Please do not revise the calibration parameters without professional equipment and qualified personnel. Remove the battery if the meter will not be used for long time in case the leaky battery damages the meter. Do not allow the instrument and the pins to touch any corrosive liquid to avoid damage. The electrode measurement pins are extremely sharp.
Aiele Ash Ash-Japanese Beech Board Basralocus Birch Black Afara Beech-European Balsa Cedar Cupressus lusitanica Campeachy Common beech Chestnut sweet,red Dabema Douka Douglas fir Ebiara Ebony Emien Elm Guanandi Hornbean Hickory poplar Hickory silver poplar Hombeam white Iroko Izombe Jarrah Juniper Kapok Karri Lpe Limba Logwood Maple Mockernut Niangon Niove Okoume Oak-holm Oak Parana pine Patagonian cypress Pear wood Purple heart Rio rosewood Red Oak Rosewood
American Tree Health Teak White hombeam Willow White Oak Walnut tree Cherry wood Common aspen Cherry mahogany Cypress,red Carpet Durmast oak Damson wood Elm English Oak Fibre board Kosipo Kaurane Particleboard Larch Limba Mahogany Maritime pine Paper Pine Plum wood Poplar Red sandalwood Yellow birch M2 11
Swiss pine Textiles Walnut White beech Wood fibre board Western red cedar White poplar White birch White maple Afrormosla Cork Drywall Imbuia Kokrodua Melamine particle board Niove Bidinkala Rubber tree Sheetrock Tola-real,red Phenolic resin particle board M3 M4 (Building materials) Concrete 10
