Owner`s manual

AUTO mode operation
- Press the ON/OFF button to turn the SCC on.
- Press and hold the SET button and press the MAN/AUTO
button to set the SCC to AUTO mode (the MAN/AUTO button
must be pressed within less than 3 seconds of pressing the
SET button).
- If the set temperature is greater than the room
temperature for the current time period the heater will
start.
- The SCC will display the time period and run according
to the temperature set for that time period.
- The SCC will automatically advance to the next time
period and operate according to the set temperature for
the new time period.
Turning the
heater ON and
selecting
AUTO mode
- Press the ON/OFF button.
- The display will revert to OFF mode.
- The room fan will continue to run until the heater has cooled
sufficiently.
Turning the
heater OFF
- The set temperature can be temporarily adjusted while
operating in AUTO mode.
- Increase set temperature: Press the UP arrow to increase set
temperature by 1
o
C.
- Decrease set temperature: Press the DOWN arrow to
decrease set temperature by 1
o
C.
- At the start of the next programmed time period, the set
temperature will revert to the pre-programmed temperature
you have set for that time period.
Adjusting the
room
temperature
- When operating in AUTO mode the heater will automatically turn on and off to
maintain the programmed temperature.
- The SCC will automatically advance through the 4 time periods (WAKE, AWAY,
HOME and SLEEP) each day and adjust the set temperature to the pre-
programmed temperature you have set for each time period (see pages 7 & 9).
Heater operation
Press the HOME/AWAY button to advance to the next time
period. Normal program settings will resume at the end of the
next period. Following is an example of how this can be used:
- If the SLEEP period is programmed to start at 10pm and
you go to bed early at 9pm, pressing HOME/AWAY will
bring forward the SLEEP period settings.
Using
HOME/AWAY
in AUTO mode
6