Owner`s manual

- Four daily time periods:
- In AUTO mode they can be pre-programmed with a start
time and temperature each day.
HOME
AWAY
WAKE
SLEEP
- Days of the week:
- Displays current day once it has been set.
MON
TUE
WED
THU
FRI
SAT
SUN
Heater operation
- Displays current time once it has been set.
- Fan symbol and fan speed:
- In HEAT mode - fan symbol rotates and speed is displayed.
- In COOL mode - fan symbol rotates.
ZONE
1
2
3
4
- ZONE display:
- ZONE and zone numbers are only displayed if they have
been installed and enabled by the installer.
- Only enabled zones can be displayed.
- A zone number displayed indicates that a zone is on.
- "Battery" symbol is displayed when the power to the heater is off
or the SCC is disconnected. Current time and day settings will
be retained for approximately 1 hour.
- Note: This SCC is hard-wired to the heater and does not use
batteries.
- Service call required. Contact your local Braemar dealer or
contact Braemar Service on 1300 650 644.
- ON indicates that the SCC has been turned on to operate the
heater or cooler (where installed). ON flashes when the heating
or cooling cycle is starting.
ON
- OFF indicates that the SCC is turned off.
OFF
Display features
4