Owner`s manual

MONTUEWEDTHUFRISATSUN
MAN
AUTO
ON
ZONE
PUMP
HEATCOOL WAIT
RESET OFF
1
2
3
4
HOME
AWAY
WAKE
SLEEP
Heater Operation
- Burners are alight:
- Inner flame flashing - low gas rate.
- Outer flame flashing - high gas rate.
- Temperature:
- Displays approximate room temperature.
- Temporarily displays set temperature when the up or down
arrow is pressed, reverts back to current temperature after 5
seconds.
- Temperature is not displayed in evaporative cooling mode.
- Evaporative or refrigerated air-conditioner (where
installed) is operating.
- SCC is in MANUAL operation mode.
MAN
- SCC is in AUTOMATIC operation mode.
AUTO
- WAIT and ON are displayed flashing at the start of a heating or
evaporative cooling cycle.
WAIT
- COOL mode is selected on SCC.
COOL
- HEAT mode is selected on SCC.
HEAT
- SET is displayed flashing with another segment to indicate the
item being set or adjusted.
SET
- RESET is displayed flashing (along with a number in
the time display) when the control system has
detected a fault.
RESET
Display features
3