Owner`s manual

Refrigerated cooler operation
Setting the AUTO program
Single SCC systems:
- Refer to HEATER OPERATION section of this manual - pages 7 & 8.
Multiple SCC systems:
- Refer to HEATER OPERATION section of this manual - pages 9 & 10.
Using the FAN-only feature
- Turn the SCC OFF (press ON/OFF button if required).
- Press and hold the FAN button for 3 seconds - the heater fan
will start and increase to its maximum speed.
- To get air flow to zones (where fitted) press the
corresponding zone button.
- The fan speed is not adjustable in "FAN-only" mode.
- Press the ON/OFF button to turn the fan off.
Single SCC
systems
- Turn the "Master" SCC OFF (press ON/OFF button if
required).
- Press and hold the FAN button on the "Master" SCC for 3
seconds - the heater fan will start and increase to its
maximum speed.
- To get air flow to zones press the ON/OFF button on the
"Slave" SCC IN EACH REQUIRED ZONE to turn it on.
- The fan speed is not adjustable in "FAN-only" mode.
- To turn FAN-only mode off press the ON/OFF button on the
"Master" SCC.
Multiple SCC
systems
WED
ON
ZONE
1
2
3
WED
ON
Fan-only display
with no zones
enabled - single
SCC.
Fan-only display
with zones 1, 2 and
3 on - single SCC
with zones, or
multiple SCC
system.
R5