Owner`s manual

Evaporative cooler operation
Troubleshooting
Before requesting a service call please run through the simple checks in the
following "Troubleshooting" section.
If required, call Braemar Service on 1300 650 644.
Potential cause/remedy
Problem
- Some odour from new cooler pads is normal. Allow time for
the pads to be conditioned by running the cooler.
Unpleasant
odour
Dry pads:
- Check water flow to pads.
- Ensure that water is turned on to cooler.
Not enough doors and windows open in house:
- Open more doors and windows, particularly in the areas
that require more cooling.
High ambient humidity:
- It is normal for an evaporative cooler to not cool as
effectively on days of high ambient humidity compared to
days of low humidity.
Inadequate
cooling
An operational fault has been detected by the cooler's in-built
diagnostic software. Check the following:
- Ensure that the water supply and power have been turned
on to the cooler.
- Check the cooler drain pipe is not blocked.
Record the number displayed on the screen - this will be
where the time is usually displayed..
If required, call Service on 1300 650 644 and quote the
number displayed on the SCC screen and the serial number of
the cooler as recoded at the front of the cooler section of this
manual.
SCC flashes
the spanner
symbol
8