Owner`s manual

Turn on and MANUAL or AUTO selection
- Press the AC MODE button to select COOL mode if required.
- Press the ON/OFF button to turn the SCC on.
Turning the
cooler ON or
OFF
Evaporative cooler operation
- Press the MAN/AUTO button to switch between MANUAL
and AUTO operating modes.
Select
MANUAL or
AUTO mode
MANUAL operation
- Press the UP or DOWN arrow buttons to increase or
decrease the fan speed.
Adjusting the
fan speed
When operating in MANUAL mode the user controls both the fan speed and
operation of the cooler pump.
- Press the COOL/VENT button to turn the pump on or off.
- Pump ON - evaporative cooling mode.
- Pump OFF - ventilation only mode.
- With the pump turned on the SCC will flash WAIT at the start
of a cooling cycle while waiting for the cooler tank to fill with
water and to pre-wet the cooler pads. The "snowflake"
symbol is displayed when the pump is on.
Turning the
pump on or off
AUTO operation
- Press the UP or DOWN arrow buttons to increase or
decrease the cooling output.
- The cooler will automatically adjust the fan speed and pump
operation based on the temperature sensed at the SCC.
To increase or
decrease
cooling output
When operating in AUTO mode the user controls the cooling output. The cooler
controls the pump and fan speed automatically.
Note: In multiple SCC systems, the evaporative cooler can be operated from the
"Master" SCC only. Zones do not operate in evaporative cooling mode.
4