Owner`s manual

Potential cause/remedy
Problem
- Check that SCC is set to required temperature (Set
temperature must be above room temperature for heater to
start) - increase set temperature if required.
- Fan speed may be set too low - try increasing the fan speed.
- Check that outlets/zones are open to all areas that require
heating.
- Check the return air grille is not obstructed.
- Check that the return air grille and filter are clean - clean if
required.
- Check that the SCC is set to HEAT mode - press AC MODE
button to change to HEAT mode if required.
- If operating in MANUAL mode check that HOME is selected
on SCC - press HOME/AWAY button if required.
- Check that doors and windows are closed.
House is not
heating
effectively
Troubleshooting
Heater operation
- Check that the time and day displayed are correct.
- Check that AM/PM is correct in the AUTO program settings.
- Check time, temperature, zones and fan speed settings in
the AUTO program.
Heater
operates at
wrong times in
AUTO mode
- Check that gas is turned on at gas meter. If the gas is turned
off contact your installer or gas supplier.
Heater does
not start - fault
code 07
displayed
Keep return air filter clean
It is recommended that the return air filter (where fitted) be checked and cleaned
at least every 2 weeks during the heating season. For instructions on the
removal and cleaning of your return filter you should contact your local Braemar
Dealer or your installer.
Annual maintenance
It is recommended that your Braemar gas ducted heater be maintained annually
prior to the start of each heating season. Contact your local Braemar dealer or
phone [phone] to be directed to your closest authorised Braemar Service
Agent.
Maintenance
13