Owner`s manual

- Press the ON/OFF button on the "Master" SCC. The "Master"
SCC must be ON to enable "Slave" controls to be turned ON.
- Press the ON/OFF button on SCC you wish to program to
turn it ON.
- Press the SET button and hold for 3 seconds - the SCC
will enter program setting mode, SET & MON will flash).
Enter program
setting mode
- Press the UP or DOWN arrow buttons to scroll through the
day selection options:
- Individual days - MON, TUES, WED, THU, FRI, SAT, SUN
- Blocks of days - [MON-FRI], [SAT-SUN], [MON-SUN]
- Press SET when the required day or group of days is
displayed.
Select day or
group of days
to program
- Set WAKE period start time:
- Press UP or DOWN arrow buttons to adjust to required
start time for displayed time period.
- Ensure that 'AM' or 'PM' is correct.
- Press SET when the required start time is displayed.
- Set WAKE period temperature:
- Press UP or DOWN arrow buttons to adjust to required set
temperature for displayed time period.
- Press SET when required temperature is displayed.
Set WAKE
period program
values
Setting the AUTO programs - MULTIPLE SCC's
- Repeat the above steps for AWAY, HOME and SLEEP time
periods.
- The SCC will automatically advance to the next time period
once the previous one has been set.
- The SCC will automatically exit program setting mode once
all time periods have been set.
Set program
values for
AWAY, HOME
and SLEEP
periods
Heater operation
- Repeat the above steps for all other SCC's on the system.
- Each can be set with its own times and temperatures,
independent of others SCC's on the system.
Set program
values for
remaining
SCC's
10