Owner`s manual

- Press the ON/OFF button to turn the SCC ON.
- Press the SET button and hold for 3 seconds (the SCC will
enter program setting mode, SET & MON will flash).
Enter program
setting mode
- Press the UP or DOWN arrow buttons to scroll through the
day selection options:
- Individual days - MON, TUES, WED, THU, FRI, SAT, SUN
- Blocks of days - [MON-FRI], [SAT-SUN], [MON-SUN]
- Press SET when the required day or group of days is
displayed.
Select day or
group of days
to program
- Set WAKE period start time:
- Press UP or DOWN arrow buttons to adjust to required
start time for displayed time period.
- Ensure that 'AM' or 'PM' is correct.
- Press SET when the required start time is displayed.
- Set WAKE period temperature:
- Press UP or DOWN arrow buttons to adjust to required set
temperature for displayed time period.
- Press SET when required temperature is displayed.
- Set WAKE period zones (where fitted):
- Where zones have been fitted (and enabled by the
installer when setting up the system), zones can be set to
be either on or off for the displayed time period.
- Press ZONE buttons 1-2-3-4 to turn zones on or off for
displayed time period.
- Only zones that have been enabled by the installer can be
selected.
- Set WAKE period fan speed:
- Press UP or DOWN arrow buttons to adjust to required fan
speed for displayed time period.
- Press SET when required fan speed is displayed.
Set WAKE
period program
values
Setting the AUTO program - SINGLE SCC
- Repeat the above steps for AWAY, HOME and SLEEP time
periods.
- The SCC will automatically advance to the next time period
once the previous one has been set.
- The SCC will automatically exit program setting mode once
all time periods have been set.
Set program
values for
AWAY, HOME
and SLEEP
periods
Heater operation
8