Installation & Assembly

Green Grounding Screw (E)

Headless screw (D)

Mounting Screw (B)

Lock Nut (F)

Mounting plate (A)

Rubber Pad (H)Ball Nut (G)

Wire Connector (C)

Turn on the power at fuse or circuit box

3. Pull out the source wires and the house grounding wire from the outlet box. Make wire connections using the

wire connectors (C):

---Connect the black wire from the fixture to the black wire from the power source.

---Connect the white wire from the fixture to the white wire from the power source.

---Attach the fixture grounding wire to the mounting plate (A) with the green grounding screw (E). Then connect it to

the house grounding wire with a wire connector (C).

Carefully put the wires back into the outlet box.

4. Attach the fixture to the mounting plate (A) by inserting headless screws (D) into holes on back plate, and then secure

it with two rubber pads (H) and two ball nuts (G).

NOTE: With silicone caulking compound,caulk complete around the back plate meets with the wall surface to

prevent water from seeping into the outlet box.

5. Install a bulb (not included). See relamping label at socket area or packaging for maximum allowed wattage.

A: 5-1/2"

B: 9-1/2"

C: 7"

A: 6-1/4"

B: 11-3/4"

C: 8"

A: 8-1/2"

B: 14-3/4"

C: 10-1/2"

Spare Parts List:

The following parts are available for re-order if damaged or missing.

Mounting Hardware

6128MM (1 SET)

6129MM (1 SET)

Glass

10104CS

10105CS

10106CS