Assembly and Installation Instructions

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
Mounting Strap (A)
Green Grounding
Screw (C)
fixture Mounting
Screw(D)
Ball Nut(G)
Mounting Screw (B)
Wire Nut (E)
Lock Nut (F)
Ball Nut(G)
Canopy
Outlet Box
House Grounding Wire
Wire Nut(E)
Fixture Mounting Screw(D)
Mounting Strap(A)
Green Grounding Screw(C)
Lock Nut(F)
Mounting Screw(B)
1. Thread two fixture mounting screws to the mounting strap, and
then secure with two lock nuts. Adjust the length of the fixture
mounting screws if necessary.
2. Attach the mounting strap to the outlet box by using two mounting
screws.
3 . Rod Connections:
a. Thread the fixture wire from the fixture through the
lower rod, and then secure the lower rod onto fixture
using the threaded pipe.
b. Thread the fixture wire through the middle rod, and then
secure the middle rod onto the lower rod using the
threaded pipe.
c. Thread the fixture wire through the upper rod, and then
secure the upper rod onto the middle rod using the
threaded pipe.
d. Thread the fixture wire through the fixture canopy, and
then secure fixture canopy onto the upper rod using the
threaded pipe.
Note: Length adjustable from 12" to 57".
Use fewer rods if shorter length is desired.
4. Pull out the source wires from the outlet box. Make wire
connections using wire nuts as follows:
---Connect the smooth-coated wire (marked) from the fixture to
the black wire from the power source.
---Connect the ribbed-coated wire (unmarked) from the fixture to
the white wire from the power source.
---Attach the fixture grounding wire to the mounting strap with
the green grounding screw, and then connect it to the
house grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
For Pendant
Coupling
Fixture
Glass Shade (H)
Socket Ring
Socket
Bulb Type A
Max. 100W
(not included)
Upper Rod
Middle Rod
Lower Rod
Threaded Pipe
Threaded Pipe
Threaded Pipe
Hardware Package (included):
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
Turn off the power at fuse or circuit box
Installation Steps