SDS

V62-540 PPG BREAK-THROUGH INTERIOR/EXTERIOR SEMI-GLOSS ULTRA DEEP
BASE
Product name
1
Product code
Date of issue
Version
00441876
23 November 2020
Section 9. Physical and chemical properties
Vapor pressure
Relative density
Vapor density
Solubility
1.04
Not available.
Not available.
Soluble in the following materials: cold water.
Evaporation rate
Not available.
Auto-ignition temperature
Flash point
Not available.
Closed cup: Not applicable. [Product does not sustain combustion.]
Not available.
Viscosity
Kinematic (40°C (104°F)): >0.21 cm
2
/s (>21 cSt)
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
:
Flammability (solid, gas)
:
Not available.
Lower and upper explosive
(flammable) limits
:
Not available.
Decomposition temperature
:
Not available.
% Solid. (w/w)
:
34.212
Density ( lbs / gal )
:
8.68
Volatility
:
69% (v/v), 65.788% (w/w)
Section 10. Stability and reactivity
Hazardous decomposition
products
Conditions to avoid
The product is stable.
Chemical stability
:
:
:
Incompatible materials
:
Possibility of hazardous
reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
Reactivity
:
No specific test data related to reactivity available for this product or its ingredients.
When exposed to high temperatures may produce hazardous decomposition products.
Keep away from the following materials to prevent strong exothermic reactions:
oxidizing agents, strong alkalis, strong acids.
Decomposition products may include the following materials: carbon monoxide, carbon
dioxide, smoke, oxides of nitrogen.
Refer to protective measures listed in sections 7 and 8.
Section 11. Toxicological information
Acute toxicity
Information on toxicological effects
United States
Page: 6/11