SDS

V52-440 PPG BREAKTHROUGH INTERIOR/EXTERIOR SATIN ULTRA DEEP BASE
Product name
1
Product code
Date of issue
Version
00441870
23 November 2020
Section 9. Physical and chemical properties
Vapor pressure
Relative density
Vapor density
Solubility
1.08
Not available.
Not available.
Soluble in the following materials: cold water.
Evaporation rate
Not available.
Auto-ignition temperature
Not available.
Not available.
Viscosity
Kinematic (40°C (104°F)): >0.21 cm
2
/s (>21 cSt)
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
Flammability (solid, gas)
:
Not available.
Lower and upper explosive
(flammable) limits
:
Not available.
Decomposition temperature
:
Not available.
% Solid. (w/w)
:
39.025
Density ( lbs / gal )
:
9.01
Volatility
:
66% (v/v), 60.975% (w/w)
Section 10. Stability and reactivity
Hazardous decomposition
products
Conditions to avoid
The product is stable.
Chemical stability
:
:
:
Incompatible materials
:
Possibility of hazardous
reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
Reactivity
:
No specific test data related to reactivity available for this product or its ingredients.
When exposed to high temperatures may produce hazardous decomposition products.
Keep away from the following materials to prevent strong exothermic reactions:
oxidizing agents, strong alkalis, strong acids.
Decomposition products may include the following materials: carbon monoxide, carbon
dioxide, smoke, oxides of nitrogen.
Refer to protective measures listed in sections 7 and 8.
Section 11. Toxicological information
Acute toxicity
1-(2-butoxy-1-methylethoxy)
propan-2-ol
LC50 Inhalation Dusts and mists
Rat
5.4 mg/l
4 hours
LD50 Dermal
Rat
>2000 mg/kg
-
LD50 Oral
Rat
4.05 g/kg
-
Product/ingredient name
Result
Species
Dose
Exposure
Information on toxicological effects
United States
Page: 6/11