BTI Hydraulic Tool Breaching Door Manual Model Type: 09 BTI Part Number: Door: HD / Stand: HDS Revised: 01 January 2011
Breaching Door Installation The installation of the BTI training door is straightforward and most likely selfexplanatory by visual examination. Caution: Through our physical testing of actual doors during the development of this product, forces in excess of 3000 lbs. have been seen during a breach. Therefore it is advisable to anchor or mount your product accordingly. Typical house construction methods are not adequate for the numerous breaches for which this product has been designed.
HYDRAULIC DOOR STAND ASSEMBLY ASSEMBLY INSTRUCTIONS: PLACE DOOR ON BASE PLATE (B) AND ATTACH USING THE ½” X 1 ¾” BOLTS. ATTACH DOOR BRACES (A) USING THE ½” X 1 ¾” BOLTS.
Thank you for your purchase and use of the BTI Breaching Door system. This innovative and patented training device provides realistic training scenarios that are discussed on the following pages. Warranty Your new BTI Training door includes a 1-year manufacturer's warranty that covers quality and workmanship. If at any time you are unsatisfied with this product or its operation, please feel free to contact us using any of the options listed under contacts below.
Breaching Door Operation Your new breaching door has been designed to simulate an inwardly opening door for forced entry training. This door may be mounted in a structure such as a training or live fire facility, or may be utilized with the optional BTI Hydraulic Door Stand. Pins. With the purchase of your BTI training door, you received a quantity of breaching pins.
Breaching Door. Your new breaching door has been engineered to simulate many scenarios for forced entry training. As previously discussed, 3 different door construction types can be simulated utilizing the 3 different types of engineered pins. Additionally, 1 to 5 lock sets can be simulated utilizing the pin sockets located on the backside of the breaching door.
Spent pins may be extracted from the insertion direction utilizing a screw driver or similar tool as shown on the following page.
IMPORTANT NOTICE!! ATTN: BREACHING TRAINER Please deliver this notice to the BREACHING TRAINER BTI Breaching Pins and/or panels are required and MUST be used for training on ALL BTI Breaching Doors. The use of substitute pins or panels will result in loss of warranty. Pins and panels can be obtained by going to our web site: www.breachingtechnologies.com Contact BTI for a price quote by emailing: delj2121@sbcglobal.
End Use License Agreement BTI Breaching Doors are manufactured using a patented socket or panel system installed in the frame and door. It should be specifically noted that the Purchaser must use the BTI patented engineered pins or panels when breaching the door. Any use of a substitute product is strictly prohibited and would constitute a violation of BTI policy and thereby be in default of this Licensing Agreement notification.
