BTI Breaching Window Stand Assembly Instructions BTI Part Number: WSD 01 April 2012
1) Assemble parts A, B & C as shown using 1/2” bolts, flat washers, lock washers and nuts (finger tight only). C A B C A B Make sure window mounting holes face forward.
2) Remove window wing nuts and separate top and bottom plates. 3) Attach bottom plate as shown using 3/8” bolts (tighten securely). 4) Attach top plate as shown using wing nuts (tighten securely).
5) Attach spreader bars (front and back) using spikes (included). Spreader bars will ensure entire assembly is square. Optional: Assembly may also be bolted to concrete floor (hardware not included). 6) Securely tighten 1/2: bolts from step one.
