Phau Ntawv Qhia

6
EN
HAIR STRAIGHTENING
• Place the hair straightener on a at steady heat-
resistant surface. Make sure that the heating plates
and the outer surfaces do not touch fusible and
inammable objects.
• Use the unit on healthy undyed and not permed hair.
• If your hair is dyed or was permed, use the hair
straightener rarely.
• Before straightening wash your hair with shampoo,
wipe it with a towel, dry with a hairdryer and comb
your hair.
• Press the heating plates (4) together and press the
lock (1).
• Put the hair straightener on a at steady and heat-
resistant surface.
• Insert the power plug into the mains socket, the
symbols “OFF” will be shown on the display (5).
• Switch the hair straightener on by pressing and
holding the on/o󰀨 button (2) «
», the display (5)
lighting will turn on. The temperature symbols “210
°С” will start ashing on the display (5) and the
heating scale on the right part of the display (5) will
appear, the default temperature is 210 °С.
• Notes:
- when switching the unit on for the rst time, a
smell from the heating element can appear, this is
normal and it is not covered by warranty.
• You can set the necessary temperature of heating
plates by touching the buttons (3) «-/+».
Hair type Temperature
Damaged, colored, bleached, ne from +150 °С to +180 °С
Normal from +180 °С to +210 °С
For professional styling from +210 °С to +230 °С
• When the heating plates reach the set temperature,
the temperature digital symbols on the display (5) will
be glowing constantly.
• Notes:
- you can turn the accidental temperature change
blocking function of the heating plates (4). To do
this push and hold the button (3) “-”, the blocking
symbol «
» will appear on the display (5).
- to turn o󰀨 the blocking function push and hold the
button (3) “-”, the blocking symbol «
» will fade
on the display (5).
• Divide the smoothly combed hair into locks about 4-5
cm wide.
• Place a lock of hair between the heating plates (4).
• Press the heating plates (4) with slight e󰀨ort and
glide them till the end of the hair lock.
WARNING:
do not leave the heating plate at one part of the hair
lock for longer than 2 seconds.
• Straighten all hair locks.
• Cool your hair down before nal styling or applying
hair spray.
• Avoid contact of heated surfaces of the hair
straightener with your face, neck and other parts of
your body.