Phau Ntawv Qhia

8 EN
(14) will also show the heating temperature of the water
in the kettle ask (1).
• After the water boils, you will hear a sound signal and the
kettle will switch to the water temperature maintenance
mode.
• You can set the desired water temperature maintenance
mode by pressing one of the buttons (11) «
, »:
- if the kettle is in the standby mode, press the kettle
on/o󰀨 button (17) « », and the indicators of all control
buttons will light up;
- press the button (11) « » once, and you will hear a
sound signal, the digital symbols (14) will indicate the
water heating temperature «40», the indicators of the
control buttons (11) « , », (10) « » and (17) « »
will light up, the digital symbols (14) will also show the
temperature of water heating in the kettle ask (1);
- after heating the water to 40°C you will hear a sound
signal and the kettle will switch to the water temperature
maintenance mode.
• A single press of the key (11) « » increases the water
heating temperature by 5 degrees, a single press of the key
(11) «
» lowers the water heating temperature by 5 degrees.
• The operating time of the water temperature maintenance
mode is 2 hours, if the water temperature falls by 5 degrees,
the water boiling/heating mode will be switched on again,
after that the water temperature maintenance mode will be
switched on.
Note: the memory function is turned on in the water
temperature maintenance mode, you can remove the
kettle from the base (7) up to 10 times and set it back,
the memory function is available provided that the water
temperature in the kettle ask (1) goes down by no more
than 8 degrees from the set temperature, when the water
cools down by more than 8 degrees, the memory function
will be unavailable.
• If it is necessary to switch the kettle o󰀨, press the On/O󰀨
button (17) «
».
Note: after water boiling, droplets may appear on the
surface of the stand (7) due to steam condensation. This is
a normal phenomenon and is not a warranty case.
HEATING THE WATER UP TO PRESET
TEMPERATURE
• For making di󰀨erent tea varieties the special water
temperature is required.
• Recommended water temperature: 70°C – white and
green tea, 80°C – instant co󰀨ee, 90-100°C – black tea.
• Let's consider the option of heating boiled water to the
temperature of 70°C:
- if the kettle is in the standby mode, press the kettle
on/o󰀨 button (17) «
», and the indicators of all control
buttons will light up;
- press the water heating mode button (10) « », then
press the water heating mode button to 70°C (13) « »,
you will hear a sound signal, the set temperature «70» will
be displayed with digital symbols (14), the control button
indicators (13) « », (17) « » will light up, digital symbols
(14) will also show the heating temperature of the water