Assembly Instructions Caution: You must read this before you proceed.
Hardware Label Picture Description QTY ① Bolt (M6X24mm) 1 ② Bolt (M6X15mm) 9 ③ Allen Key 1 ④ Washer 9 ⑤ Nut 1 ⑥ Spring Washer 9 Assembly Preparation Before Beginning Assembly: Page 2 OF 5
Assembly Steps Overview Table Top (A) Leg (B) Leg (C) FRONT FACING This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Remove all Parts from package, and place onto a clean, non-marring surface.
Step 2 Align the mounting positions of Leg(B) and Leg(C) as shown above, then attach using Bolt(①) and Nut(⑤) with Allen Key(③). Step 3 Carefully place the Table Top(A) facedown on a clean, non-marring surface. Align the mounting positions of Legs with Table Top(A). Attach Legs to Table Top(A) using Bolts(②), Spring Washers(⑥), and Washers(④) with Allen Key(③). In a sequential manner, fully tighten all Bolts at all joints.
Step 4 If the table legs cannot horizontal reach the plate, just press the cross as marked by picture Your Table is now ready for use. This Table can only be used on a flat, level surface.