Installation & Assembly

Step 2
Step 3
Step 4
Repeat the same process for the remaining three legs.
Once all bolts are in place, begin to tigten in all 12 (twelve) bolts in a sequential manner.
Before all the bolts are FULLY driven, turn the table the right way up.
Assess and adjust all legs are level with ground.
Tighten up all bolts.
Put the Table Leg over the tripoint - Screw mount positions.
Attach the Bolts with Flat Washer RIngs onto contact point as shown in picture.
DO NOT FULLY TIGHTEN THE BOLTS.
STEP 4 : Tighten all Bolts.
Turn the table right side up. Your table is ready for use