Installation & Assembly

IMPORTANT SAFETY INFORMATION
ELECTRIC FIREPLACE SAFETY INFORMATION
AND WARNING
ATTENTION: This Safety Information and Warning provides basic information for
using an electric fireplace insert safely. Failure to follow the recommendations
and warnings below may result in risk of fire, electric shock, and injury to person
and property.
▪ WARNING! There's a risk of fire, electric shock, and injury to person if you
don't follow the included instruction and safety information. We are not liable
for any damages or injury caused by mishandling, improper installation, or
improper use of the electric fireplace insert.
▪ WARNING! Prior to using your electric fireplace insert, compare the rated
power of the electric fireplace insert to the capacity of the electrical circuit you
plan to use it within. In order for the electric fireplace insert to be safely used,
the electric fireplace insert’s electrical demand, in addition to the electrical
demand of any other electric devices using the circuit, should be well within
the electrical capacity of the circuit. If you are unsure of the electrical capacity
of the circuit, or the electrical demand of devices using the circuit, contact a
licensed electrician for assistance.
▪ WARNING! Your electric fireplace insert may require a dedicated electrical
circuit. Check with your local building codes.
▪ WARNING! To avoid electrical shock, do not open the back panel of the insert
unless the power has been turned off and the insert has been unplugged.
▪ WARNING! The electric fireplace insert must be used on an AC supply only,
and the voltage marked on the heater must correspond to the supply voltage.
▪ WARNING! Any repairs or modifications done to this electric fireplace insert
are not recommended, and may cause an increased risk of fire, electric shock,
and injury to person. Any repairs or modifications will void all warranty and
technical support for this unit. If the decision of the user of the electric
fireplace insert is to repair or modify the insert or any electrical wiring, such
repairs or modifications should be done only by a licensed electrician, and
must comply with local building codes.