Installation & Assembly

CHECK THAT YOU HAVE ALL THE
PIECES LISTED ON THE LEFT HAND
SIDE.
LAY A CLEAN SHEET ON A FLAT
SURFACE BIG ENOUGH TO ASSEMBLE
YOUR FURNITURE ON IN ORDER TO
PROTECT YOUR FURNITURE.
1.
Attach one of sofa side (A) to the left hand side of sofa base (C). Align the bolt
brackets of both (A) and (C) in the position shown in the diagram above. For
each of the connecting bolt brackets, insert bolt (D) through a washer (E),
through the bolt brackets and secure with a nut (F). Loosely tighten with the
Allen key (G) and spanner (H) until all the bolts have been put in place. Then
go over each bolt and fully tighten.
E
F
2
1
B
1C
12
D
12
12
A
G 1
H
1
2.
Attach sofa back (B) to sofa base (C) and sofa side (A). Align the bolt brackets
of (B) with those of (A) and (C) as shown in the diagram above. For each of the
connecting bolt brackets, insert bolt (D) through a washer (E) through the
brackets and secure with a nut (F). Loosely tighten with the Allen key (G) and
spanner (H) until all the bolts have been put in place. Then go over each bolt
and fully tighten.
A
C
B
C
ASSEMBLY INSTRUCTIONS
(
SINGLE SOFA)
BEFORE YOU START ASSEMBLING YOUR FURNITURE: