Owner Manual

Step 2
With assistance from your adult partners, position the Chair Seat(B) on it's
back on a clean, non-marring surface, as shown.
Install the first Leg(C) into the bottom of the Chair Seat(B) by placing one
Plastic Washer(①) onto the threaded stem.
Insert the threaded stem of Leg(C) into the front mounting position of Chair
Seat(B) then tighten by turning the leg clockwise until the leg is completely
secure.
Repeat this process with the remaining three legs.
Step 1
Wooden Leg(C)
Plastic Washer(①
)
Chair Seat(B)
Chair Seat(B)
Wooden Leg(C)
Velcro
Chair Back(A)
Page 3 OF 5