Caution : You must read this before you proceed.
Label Description QTY A Chair Back (With Velcro) 1 B Chair Seat 1 C Wooden Leg 4 Description QTY Plastic Washer 5 Label Picture Picture ① Before Beginning Assembly: Page 2 OF 5
Step 1 Wooden Leg(C) Plastic Washer(①) Chair Seat(B) With assistance from your adult partners, position the Chair Seat(B) on it's back on a clean, non-marring surface, as shown. Install the first Leg(C) into the bottom of the Chair Seat(B) by placing one Plastic Washer(①) onto the threaded stem. Insert the threaded stem of Leg(C) into the front mounting position of Chair Seat(B) then tighten by turning the leg clockwise until the leg is completely secure. Repeat this process with the remaining three legs.
Place the Chair upright. Then push the Chair Back(A) downwards until the Backrest is fully slotted and locked into position as shown in the picture. Step 3 Chair Back(A) Chair Seat(B) Wooden Leg(C) Please push Chair Back(A) down again,until the Velcro sticks together as the shown. Step 4 Make sure all parts are connected and locked into position. Your Accent Chair is ready for use. This Accent Chair can only be used on a flat, level surface.
Page 5 OF 5
