Assembly Instruction

Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth. Do not
use abrasive cleaners. Hardware may loosen over time. Periodically check that all connections are tight.
C
D
E
F
B
A
Attach Anti-Tipping Hardware(G) to wall: Attach bracket (vertically) to wall using 2 of the screws
provided; Attach bracket (horizontally) to furniture back (directly below top) with 2 of the screws
provided. Place bracket as close to center of furniture back as possible in relation to wall stud and
the desired position in the room; Move furniture to its final position. Thread the strap through bracket,
pull it tight.
Attached four Legs(B) to the Chest(A). Use Allen Bolt(C) Lock Washer(D) and Flat Washer(E) on
holes of Chest(A). Turn the Allen Key(F) in Allen Bolt(C).
A
B
1
2