Installation & Assembly

Turn the Expansion Board of Table Top(C) and located inside of the Table as shown above.

Push the Table Top(A) inwards until both wings of the Table Top(A) align.

Caution: Keep hands away from the Table Top(A) and Expansion Board of Table Top(C ) when

pushing the Table Top to avoid pinching hazards. If you can not push the Table Top(A) inwards,

just lightly shake the Table Top(A).

Step 3

Lock the Metal Fasteners under the Table Top(A) into place as shown in the above picture.

Your Table is retracted and is now ready for use.

This Table can only be used on a flat, level surface.

Step 4

____