Assembly Instructions Caution: You must read this before you proceed Leisure Chair Part List Label Picture Description QTY A Seat 1 B Front Metal Leg (with Pre-installed Levellers) 1 Page 1 OF 7
C Back Metal Leg (with Pre-installed Levellers) 1 D Iron Pipe 1 Description Bolt (M8x20mm) Bolt (M6x40mm) QTY ③ Washer 5 ④ Allen Key 1 Hardware Label Picture ① ② 5 3 Assembly Preparation Before Beginning Assembly: Page 2 OF 7
Assembly Steps Overview FRONT FACING This Leisure Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Leisure Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 2 Back Metal Leg(C) Iron Pipe(D) Front Metal Leg(B) Position Front Metal Leg(B) and Back Metal Leg(C) facedown as shown. Attach Front Metal Leg(B) to Back Metal Leg(C) with Iron Pipe(D) using Bolts(②) with Allen Key(④). Tighten the Bolts fully in a sequential manner.
Step 3 Back Metal Leg(C) Front Metal Leg (B) Seat (A) Attach Frame to Seat(A) using Bolts(①), and Washers(③) with Allen Key(④) as pictured above. Tighten the Bolts fully in a sequential manner.
Step 4 Adjust Pre-installed Levellevs heighe to achieve balance With assistance from an adult partner, stand the Leisure Chair up. Adjust the Pre-installed Levellers at the bottom of the Front Metal Leg(B) and Back Metal Leg(C) until the Leisure Chair is level with the ground. Step 5 Your Leisure Chair is ready for use. This Leisure Chair can only be used on a flat, level surface.
Page 7 OF 7
